References
- Zhao, F., Lai, M. C. and Harrington, D. L., 1999, 'Automotive-Spark Ignited Direct-Injection Gasoline Engines,' Progressed in Energy and Combustion Science, Vol. 25, pp. 427-532 https://doi.org/10.1016/S0360-1285(99)00004-0
- Drake, M. C., Fansler, T. D., Solomon, A. S. and Szekely, G. A. J., 2003, 'Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine,' SAE Paper, No. 2003-01-0547
- Sandquist, H., Lindgren, R. and Denbratt, I., 2000, 'Sources of Hydrocarbon Emissions from a Direct Injection Stratified Charge Spark Ignition Engine,' SAE Paper, No. 2000-01-1906
- Stevens, E. and Steeper, R., 2001, 'Piston Wetting in an Optical DISI Engine: Fuel Films, Pool Fires, and Soot Generation,' SAE Paper, No. 2001-01-1203
- Ortmann, R., Amdt, S., Raimann, J., Grzeszik, R. and Wurfel, G., 2001, 'Methods and Analysis of Fuel Injection, Mixture Preparation and Charge Stratification in Different Direct Injected SI Engines,' SAE Paper, No. 2001-01-0970
- Kawajiri, K., Yonezawa, T., Ohuchi, H., Suida, M. and Katashiba, H., 2002, 'Study on Interaction Between Spray and Air Motion, and Spray Wall Impingement,' SAE Paper, No. 2002-01-0836
- Kang, J. J., Kim, D. W., Choi, G. M. and Kim, D. J., 2006, 'Effect of the Shape of Impingement Plate on the Vaporization and Formation of Fuel Mixture in Impingement Spray,' International Journal of Automotive Technology, Vol. 7, No. 5, pp. 565-593
- Watkins, A. P. and Park, K., 1996, 'Assessment and Application of a New Spray Wall Impaction Model,' Computers in Reciprocating Engines and Gas Turbine, I. Mech. E, pp 1-10
- Senda, J., Kobayashi, M., Iwashita, S. and Fujiomoto, H., 1994, 'Modeling of Diesel Spray Impingement on a Flat Wall,' SAE Paper, No. 941894
- Bai C. and Gosman, D., 1995, 'Development of Methodology for Spray Impingement Simulation,' SAE Paper, No. 950283
- Shim, Y. S., Choi, G. M. and Kim, D. J.. 2007, 'Experimental and Numerical Study on Behavior of Impinging Spray According to Ambient Temperature,' Trans. of the KSAE, Vol. 14, No. 4, pp. 124-131
- Shim, Y. S., Hwang, S. C. and Kim, D. J., 2004, 'Numerical Analysis of Spray Behavior and Vaporization Characteristic of GDI Engine Injector under Ambient Conditions,' Trans. of the KSME (B), Vol. 28, No. 5, pp. 545-552 https://doi.org/10.3795/KSME-B.2004.28.5.545
- Schmidt, D. P., Martin, J. K. and Reitz, R. D., 1999, 'Pressure-Swirl Atomization in the Near Field,' SAE Paper, No. 1999-01-0496
- Park, J. H., 2002, 'Development of Numerical Spray Models and Application to Aeropropulsion Engines,' Ph. D. Thesis, Seoul National University
- O'Rourke, P. J., 1981, 'Collective Drop Effects on Vaporizing Liquid Sprays,' Ph. D. Thesis, Princeton University
- Dombrowski, N. and Hooper, P. C., 1962, 'The Effect of Ambient Density on Drop Formation in Sprays,' Chem. Eng. Sci., Vol. 17, pp. 291 https://doi.org/10.1016/0009-2509(62)85008-8