Korean Journal of Materials Research (한국재료학회지)

Materials Research Society of Korea (한국재료학회)
권호 표지
DOI QR코드

DOI QR Code

Inhomogeneity of Hot Rolling Texture in Cu/Nb Added Ultra Low Carbon Steels

  • Jiang, Ying-Hua (Division of Advanced Materials Engineering, Chonbuk National University) ;
  • Park, Young-Koo (Division of Advanced Materials Engineering, Chonbuk National University) ;
  • Lee, Oh-Yeon (Division of Advanced Materials Engineering, Chonbuk National University)
  • Published : 2007.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The texture and microstructure in Cu/Nb added ultra low carbon steels through the different thickness layer were studied after hot rolling. It was found that the two ultra low carbon steels all show the inhomogeneity of hot rolling texture and the Cu-added ultra low carbon steel was far more inhomogeneous than Nb-added one. In the center layer, the strong ${\alpha}\;fibre,\;{\gamma}\;fibre$ textures and the shear textures including 001<110>, 111<112> were founded. Near the surface, the ${\alpha}\;fibre$ texture and the orientation texture caused by a typical plane-strain deformation condition of bcc metals were observed.

Keywords

References

  1. K. Tsuzaki, N. R. Ileda, T. Maki, Scripta Mater., 36, 905(1997) https://doi.org/10.1016/S1359-6462(96)00495-2
  2. M. P. Miller, T. J. Turner, Int. J. Plast., 17, 783 (2001) https://doi.org/10.1016/S0749-6419(00)00068-1
  3. R. Mendoza, J. Huante, M. Alanis, C. Gonzalez, J.A.Juarez, Mater. Sci. Eng., 276, 203 (2000) https://doi.org/10.1016/S0921-5093(99)00267-1
  4. K. Kojima, K. Tanikawa, Y. Hosoya, ISIJ Inter., 38, 647(1998) https://doi.org/10.2355/isijinternational.38.998
  5. J. Z. Chen, L. Zhen, W. Z. Shao, Mater. Lett., 62, 88(2007) https://doi.org/10.1016/j.matlet.2007.04.074

Cited by

  1. Effect of Nb Content on the Hot Deformation Behavior of S460ML Steel pp.2194-1289, 2018, https://doi.org/10.1007/s40195-018-0783-8