PVT 측정을 통한 비결정 고분자 ABS와 SAN의 압축률과 체적팽창 연구

Studies on the Compressibility and Volumetric Expansivity of Amorphous Polymer ABS and SAN Using PVT Measurements

  • 강성욱 (한양대학교 섬유고분자공학과) ;
  • 김성훈 (한양대학교 섬유고분자공학과)
  • Kang, Seong-Wook (Department of Fiber and Polymer Engineering, Hanyang University) ;
  • Kim, Seong-Hun (Department of Fiber and Polymer Engineering, Hanyang University)
  • 발행 : 2007.10.30

초록

The specific volume change of polymer occurs to various reactions of mechanical stress, chemical reaction, glass transition and crystallization and so on. In regular state, the specific volume of material as function of temperature and pressure is changed. The experimental and theoretical equations of state (EOS) are Tait equation and Simha-Somcynsky equation for amorphous polymer and Simha-Jain theory for crystalline polymer. This study carried out measurement of the specific volume as function of temperature and pressure using Gnomix pressure-volume-temperature (PVT) and the measured data were fitted two domain Tait equation. These results that the difference of the measured and calculated value were almost same less than 0.1% and 10 parameters which were obtained Tait fitting use to calculate compressibility and volumetric expansivity of amorphous polymers. The used ABS resins were same butadiene rubber content at 16 wt% but they had different rubber size. ABS1 consisted of only one rubber size and ABS2 consisted of two rubber sizes. The compressibility and volumetric expansivity of ABS1 was higher than those of BS2. However, for the difference of volumetric expansivity between 0 and 100 MPa, ABS2 was slightly lower than ABS1.

키워드

참고문헌

  1. D. Kilburn, G. Dlubek, J. Pionteck, D. Bamford, and M. A. Alam, 'Microstructure of Free Volume in SMA Copolymers I. Free Volume from Simha-Somcynsky Analysis of PVT Experiments', Polymer, 2005, 46, 859-868 https://doi.org/10.1016/j.polymer.2004.11.083
  2. G. Diubek, V. Bondarenko, J. Pionteck, M. Supej, A. Wutzler, and R. Krause-Rehberg, 'Free Volume in Two Differently Plasticized Poly(vinyl chloride)s: A Positron Lifetime and PVT Study', Polymer, 2003, 44, 1921-1926 https://doi.org/10.1016/S0032-3861(03)00056-9
  3. M. Schmidt and F. H. J. Maurer, 'Relation between Free- Volume Quantities from PVT-EOS Analysis and PALS', Polymer, 2000, 41, 8419-8424 https://doi.org/10.1016/S0032-3861(00)00181-6
  4. M. Schmidt and F. H. J. Maurer, 'Pressure-Volume- Temperature Properties and Free Volume Parameters of PEO/PMMA Blends', J Polym Sci B: Polym Phys, 1998, 36, 1061-1080 https://doi.org/10.1002/(SICI)1099-0488(19980430)36:6<1061::AID-POLB14>3.0.CO;2-4
  5. C. Austin and P. Kennedy, 'Moldflow Data Theory', Moldflow Pty. Ltd., 1992, pp.143-179
  6. J. Pionteck, S. Richter, S. Zchoche, K. Sahre, and K. F. Arndt, 'Characterization of Network Formation during Crosslinking of Nematic Polyesters by PVT Measurements', Acta Polym, 1998, 49, 192-197 https://doi.org/10.1002/(SICI)1521-4044(199804)49:4<192::AID-APOL192>3.0.CO;2-5