참고문헌
- R. A. Hawsey, and D. K. Christen, "Progress in research, development, and pre-commercial deployment of second generation HTS wires in the USA," Physica C, vol. 445-448, pp. 488-495, 2006 https://doi.org/10.1016/j.physc.2006.04.062
- Y. Shiohara, Y. Kitoh, and T. Izumi, "Highlights in R&D for coated conductors in Japan ," Physica C, vol. 445-448, pp. 496-503, 2006 https://doi.org/10.1016/j.physc.2006.04.043
- A. P. Malozemoff, D.T. Verebelyi, S. Fleshler, D. Aized, and D. Yu, "HTS Wire: status and prospects," Physica C, vol. 386, pp. 424-430, 2003 https://doi.org/10.1016/S0921-4534(02)02201-3
- J. Y. Kato, N. Sakai, S. Tajima, S. Miyata, M. Konishi, Y. Yamada, N. Chikumoto, K. Nakao, T. Izumi and Y. Shiohara, "Diffusion joint of YBCO coated conductors using stabilizing silver layers," Physica C, vol. 445-448, pp. 686-688, 2006 https://doi.org/10.1016/j.physc.2006.05.005
- M. Sugano, T. Nakamura, K. Shikimachi, N. Hirano, S. Nagaya, "Stress tolerance and fracture mechanism of solder joint of YBCO coated conductors," IEEE Trans. Appl. Supercond., vol.17, pp. 3067-3070, 2007 https://doi.org/10.1109/TASC.2007.899395
-
C. Park, D. P. Norton, J. D. Budai, D. K. Christen, D. Verebelyi, R. Feenstra, D. F. Lee, A. Goyal, D. M. Kroeger, and M. Paranthaman, "Bend strain tolerance of critical currents for
$YBa_2Cu_3O_7$ films deposited on rolled-textured (001)...Ni," Appl. Phys. Lett., vol. 73, pp. 1904-1906, 1998 https://doi.org/10.1063/1.122321 - H.S. Shin, K.H. Kim, J.R.C. Dizon, T.H. Kim, R.K. Ko, and S.S. Oh, "The strain effect on critical current in YBCO coated conductors with different stabilizing layers," Supercond. Sci. Tech., vol. 18, pp. S364-S368, 2005 https://doi.org/10.1088/0953-2048/18/12/023
- M. Sugano, K. Osamura, W. Prusseit, R. Semerad, K. Itoh, and T. Kiyoshi, "Tensile fracture behavior of RE-123 coated conductors induced by discontinuous yielding in Hastelloy C-276 substrate," Supercond Sci. Tech., vol. 18, pp. S344-S350, 2005 https://doi.org/10.1088/0953-2048/18/12/020
- N. Cheggour, J.W. Ekin, C.L.H. Thieme, Y.Y. Xie, V. Selvamanickam, and R. Feenstra, "Reversible axial-strain effect in T-Ba-Cu-O coated conductors," Supercond. Sci. Tech., vol. 18, pp. S319-S324, 2005 https://doi.org/10.1088/0953-2048/18/12/016
- Y. Sutoh, K. Kakimoto, N. Kaneko, Y. Iijima, and T. Saitoh, "Mechanical bending property of YBCO coated conductor by IBAD/PLD," Physica C, vol. 426-431, pp. 933-937, 2005 https://doi.org/10.1016/j.physc.2005.02.086
- H. S. Shin, and Katagiri K, "Critical current degradation behavior in Bi-2223 superconducting tapes under bending and torsion strains," Supercond. Sci. Tech., vol. 16, pp. 1012-1018, 2003 https://doi.org/10.1088/0953-2048/16/9/309
- T. Kuroda, K. Katagiri, H.S. Shin, K. Itoh, K. Kumakura, and H. Wada, "Influence of test methods on critical current degradation of Bi-2223/Ag superconductor tapes by bending strain," Supercond. Sci. Tech., vol. 18, pp. S383-S389, 2005 https://doi.org/10.1088/0953-2048/18/12/027
- H.S. Shin, J.R.C. Dizon, K. Katagiri, T. Kuroda," Comparison of bending strain effect on the critical current degradation of Bi-2223 tapes through different measurement techniques," Physica C, vol. 445-448, pp. 741-745, 2006 https://doi.org/10.1016/j.physc.2006.06.037
- W. Goldacker, S.I. Schlachter, R. Nast, H. Reiner, S. Zimmer, H Kiesel, A. Nyilas, "Bending strain investigations on BSCCO(2223) tapes at 77K applying a new bending technique," Adv. Cryo. Eng., vol. 614, pp. 469-476, 2002