Journal of the Korean institute of surface engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Alloying Elements on the Corrosion Layer Formation of Pb-Grid/Active Materials Interface

Pb 기판/활물질 계면의 부식층형성에 미치는 합금원소영향

  • Oh, Se-Woong (Institute of Battery Technology, Sebang Global Battery Co., Ltd.) ;
  • Choe, Han-Cheol (Department of Dental Materials & Research Center of Nano-Interface Activation for Biomaterials, College of Dentistry, Chosun University)
  • Published : 2007.10.31
Download PDF
⟨ Previous Next ⟩

Abstract

Effects of alloying elements on the corrosion layer formation of Pb-grid/active materials interface has been researched for improvement of corrosion resistance of Pb-Ca alloy. For this research, various amounts of alloying elements such as Sn, Ag and Ba were added to the Pb-Ca alloys and investigated their corrosion behaviors. Batteries fabricated by using these alloys as cathode grids were subjected to life cycle test. Overcharge life cycle test was carried out at $75^{\circ}C$, 4.5 A, for 110 hrs. with KS standard (KSC 8504). And then, after keeping the battery with open circuit state for 48 hr, discharge was carried out at 300A for 30 sec. Corrosion morphology and interface between Pb-grid and active materials were investigated by using ICP, SEM, WDX, and LPM. Corrosion layer of Pb-Ca alloy got thicken with increasing Ca content. For Pb-Ca-Sn alloy, thickness of corrosion layer decreased as Sn and Ag content increased gradually. In case of Pb-Ca-Sn-Ba alloy, thickness of corrosion layer decreased up to 0.02 wt% Ba addition, whereas, it was not changed in case of above 0.02 wt% Ba addition.

Keywords

References

  1. E. Voss, A. Winsel, ILZRO Project LE-277, Progress Rep. No.8, International Lead-Zinc Research Organization, Research Triagle park, NC (DEC. 31, 1981)
  2. E. Voss, U. Hullmeine, J. Power Sources, 30 (1990) 209 https://doi.org/10.1016/0378-7753(93)80078-4
  3. E. J. Ritchie, J. Burhank, J. Electrochem. Soc., 117 (1970) 299 https://doi.org/10.1149/1.2407498
  4. D. Pavlov, Journal of Power Sources, 53 (1995) 9 https://doi.org/10.1016/0378-7753(94)02152-S
  5. S. W. Oh, H. C. Choe, J. Kor. Inst. Surf. Eng., 39 (2006) 1
  6. D. Pavlov, B. Manhahov, Maha, N. Penazzo, J. Electrochem. Soc., 136 (1989) 27 https://doi.org/10.1149/1.2096603
  7. Rao. United States Patent. No; 5434025
  8. R. David Pregaman. The Battery Man, September (1997) 17
  9. T. Rogachev, Journal of Power Sources, 23 (1988) 331 https://doi.org/10.1016/0378-7753(88)80077-6
  10. D. Pavlov, T. Togachevm Electrochem. Acta, 31 (1986) 241 https://doi.org/10.1016/0013-4686(86)87115-8
  11. R. D. Pregaman, Journal of Power Sources, 53 (1995) 207 https://doi.org/10.1016/0378-7753(94)01975-2
  12. J. Hertz, C. Fornasieri, J. P. Hilger, M. Notin, Proceedings LABAT '93, Varna, Bulgaria (1993) 42