DOI QR코드

DOI QR Code

Fabrication and Characterization of Bi-Based Frit Film for PDP Transparent Dielectric Front Panel

PDP 투명 유전체용 Bi계 프릿트 필름의 제조 및 특성분석

  • Lee, Sang-Jin (Department of Advanced Materials Science and Engineering, Mokpo National University) ;
  • Kim, Joo-Won (Department of Advanced Materials Science and Engineering, Mokpo National University) ;
  • Hwang, Jong-Hee (Glass & Display Team, Korea Institute of Ceramic Engineering and Technology)
  • 이상진 (국립목포대학교 신소재공학) ;
  • 김주원 (국립목포대학교 신소재공학) ;
  • 황종희 (요업(세라믹)기술원 유리디스플레이팀)
  • Published : 2007.10.31

Abstract

Ceramic green sheets consisting Bi-based glass frit were fabricated for an application to PDP transparent dielectric front panel. The dispersion condition of the slurry for tape casting was pre-examined, and two kinds of hinder and plasticizer were used in the non-aqueous slurry system. In the fabrication process for the frit film, the properties such as dry and firing shrinkage, elongation, and transmittance were examined at the condition of various mixing ratio of plasticizers. In the mixing ratio of polyethylene glycol to dibutyl phthalate of 3:5wt%, a good adhesion, elongation and transmittance were observed at the firing temperature of $580^{\circ}C$. The photograph for the cross section of the interface was also showed a dense microstructure.

Keywords

References

  1. Y. S. Kim, 'Powder Materials Used in Plasma Display Panel,' J. Kor. Powder Metallurgy Institute, 13 [3] 161-71 (2003) https://doi.org/10.4150/KPMI.2006.13.3.161
  2. S. K. Beak and Y. S. Kim, 'Effects of Ceramic Fillers on Fracture Resistance of Barrier Ribs of PDP,' Asia display/ IMID'04 digest, Daegu, 552-54 (2004)
  3. G. H. Hwang, W. Y. Kim, H. J. Jeon, and Y. S. Kim, 'Phys-ical Properties of Barrier Fibs of Plasma Display Panels : II, Effect of Fillers,' J. Am. Ceram. Soc., 85 [12] 2961-64 (2002) https://doi.org/10.1111/j.1151-2916.2002.tb00563.x
  4. J. S. Jun, M. R. Cha, and H. S. Kim, 'Optical Properties of $Bi_2O_3-ZnO-SiO_2$ Glass System for Transparent Dielectric,' Kor. J. Mater. Res., 14 [9] 670-75 (2004) https://doi.org/10.3740/MRSK.2004.14.9.670
  5. M. Busio and O. Steigelmann, Glastech. Ber. Glass Sci. Technol., 73 [10] 319-23 (2000)
  6. J. M. Kim, K. J. Hong, N. S. Kim, and H. S. Kim, 'Dissolution Phenomenon in BaO-$B_2O_3$-ZnO Glass System by Acid Etching(in Korean),' J. Kor. Ceram. Soc, 43 [1] 33-7 (2006) https://doi.org/10.4191/KCERS.2006.43.1.033
  7. K. Otsuka, Y. Ohsawa, K. Yamada, and Sekibat, 'A Study on the Alumina Ceramics Casting Conditions by the Doctor Blade Method and their Effect on the Properties of Green Tape(Part),' Yogyo-Kyokai-Shi., 94 [3] 351-59 (1986) https://doi.org/10.2109/jcersj1950.94.1087_351
  8. K. Otsuka, Y. Ohsawa, K. Yamada, and Sekibat, 'A Study on the Alumina Ceramics Casting Conditions by the Doctor Blade Method and their Effect on the Properties of Green Tape(Part),' Yogyo-Kyokai-Shi., 94 [11] 1136-41 (1986) https://doi.org/10.2109/jcersj1950.94.1095_1136
  9. K. Nagata, 'Rheology Behavior of Suspension and Properties of Green Sheet-Effect of Compatibility between Dispersant and Binder,' J. Ceram. Soc. Jpn., 100 [10] 1271-75 (1992) https://doi.org/10.2109/jcersj.100.1271
  10. S. J. Lee and J. W. Kim, 'Dispersion Behavior of Transparent Dielectric Glass Frits in the Mullite-Solvent and Ammonium-Type Dispersant System(in Korean),' J. Kor. Ceram. Soc., 43 [10] 635-39 (2006) https://doi.org/10.4191/KCERS.2006.43.10.635