Journal of the Korean Society of Propulsion Engineers (한국추진공학회지)

The Korean Society of Propulsion Engineers (한국추진공학회)
권호 표지

Architecture and Development Activities of the Full Engine Simulation Program

엔진 통합설계/해석 시스템의 구성과 개발동향

  • 진상욱 (부산대학교 항공우주공학과) ;
  • 김귀순 (부산대학교 항공우주공학과) ;
  • 안이기 (한국항공우주연구원 엔진팀) ;
  • 양수석 (한국항공우주연구원 첨단추진기관팀) ;
  • 최정열 (부산대학교 항공우주공학과)
  • Published : 2007.08.30
Download PDF
⟨ Previous Next ⟩

Abstract

A virtual engine test based on "Numerical test cell" can extremely reduce the time and cost for the development of a hardware by coupling multidisciplinary analysis. This paper introduces the development activities of full engine simulation programs in U.S.A. and Europe, with the their related techniques(the engineering models, the simulation environment and high performance computing) based on the NPSS(Numerical Propulsion System Simulation). NASA Glenn research conte. leads the development efforts of NPSS by assembling the current codes and improving their Auctions. VIVACE(Value Improvement through a Virtual Aeronautical Collaborative Enterprise), a consortium of universities, research centers and companies in Europe, is developing the PROOSIS(PRopulsion Object Oriented Simulation Software). The capability for the domestic development is also estimated by surveying the current status.

통합 가상 엔진의 "Numerical Test Cell" 시험은 다분야 연계 해석을 통하여 하드웨어의 개발에 필요한 시간과 비용을 줄일 수 있다. 본 논문에서는 미국과 유럽에서의 전체 엔진 시뮬레이션 프로그램의 개발 활동과 NPSS를 바탕으로 관련 기술(공학 모델, 시뮬레이션 환경, 고성능 컴퓨팅)을 소개한다. 미국의 NASA Glenn 연구소는 기존의 코드들을 결합하고 기능을 개선하여 NPSS 개발 연구를 이끌고 있으며, 유럽에서는 대학, 연구소, 기업체로 구성된 VIVACE 컨소시움이 각 기관의 프로그램을 통합하여 PROOSIS를 개발하고 있다. 아울러 현재의 상황에 대한 고찰을 통하여 국내 개발의 가능성을 살펴보았다.

Keywords

References

  1. 공창덕, 구자예, 김귀순, 정홍철, 항공가스터빈엔진, 동명사, 1999
  2. Hunecke, K., Jet Engines: Fundamentals of Theory, Design and Operation, Zenith Press, 1997
  3. Claus, R. W., Evans, A. L., Lylte, J. K., and Nichols, L. D., "Numerical Propulsion System Simulation," Computing Systems in Engineering, Vol. 2, No. 4, 1991, pp.357-364 https://doi.org/10.1016/0956-0521(91)90003-N
  4. Evans, A. L., Follen, G., Naiman, C., Lopez, I., "Numerical Propulsion System Simulation's National Cycle Program," AIAA 98-3113, 1998
  5. Lytle, J. K., Follen, G., Naiman, C., Evans, A. L., "Numerical Propulsion System Simulation (NPSS) 1999 Industry Review," NASA TM-209795, August 2000
  6. Lytle, J. K., "The Numerical Propulsion System Simulation: A Multidisciplinary Design System for Aerospace Vehicles," NASA TM-209194, July 1999
  7. Reed, J. A., Afjeh, A. A., "Development of a Prototype Simulation Executive with Zooming in the Numerical Propulsion System Simulation," NASA CR-200613, 1995
  8. Curlett, B. P., Felder, J. L., "Object-Oriented Approach for Gas Turbine Engine Simulation," NASA TM-106970, July 1995
  9. 일본항공우주공학회, 세계의 항공우주산업, 한국항공우주산업진흥협회, 2005
  10. Naiman, C. G., "Numerical Propulsion System Simulation Architecture," AIAA/ASME/SAE/ASEE 40th Joint Propulsion Conference and Exhibit, June 2004
  11. Follen, G., Naiman, C., "2000 Numerical Propulsion System Simulation Review", NASA CP-210673, June 2001
  12. NASA Lewis Research Center, Research & Technology 1995, NASA TM-107111, 1995
  13. Follen, G., auBuchon, M., "Numerical Zooming Between a NPSS Engine System Simulation and a One-Dimensional High Compressor Analysis Code," NASA TM-209913, April 2000
  14. Converse, G. L., Giffin, R. G. "Extended parametric representation of compressor fans and turbines. Volume 1 CMGEN user's manual," NASA CR-174645, March 1984
  15. Miller, M. J., "Small Engine Technology (SET) - Task 14 Axisymmetric Engine Simulation Environment Draft Final Report," NASA CR-208673, May 1999
  16. Yoder, D. A., Georgiadis, N. J., Orkwis, P. D., "Implementation of a Two-Equation k-$\omega$ Turbulence Model in NPARC," AIAA 96-0383, January 1996
  17. Compressor Branch Design and Analysis Codes, http://www.grc.nasa.gov/WWW/5810 /codes.htm
  18. Notti, J. E., Cormack, A., III, Schmill, W. C., Klein, W. J., "Integrated Power Attitude Control System (IPACS) study. Volume 2 Conceptual designs," NASA CR-2384, January 1974
  19. Veres, J. P., "Overview of High-Fidelity Modeling Activities in the Numerical Propulsion System Simulations (NPSS) Project," NASA TM-211351, June 2002
  20. Li, Y. G., Pilidis, P., Newby, M. A., "An Adaptation Approach for Gas Turbine Design-Point Performance Simulation," Journal of Engineering for Gas Turbines and Power, Vol. 128, October, 2006, pp. 789-795 https://doi.org/10.1115/1.2136369
  21. Turner. M. G., Reed. J. A., Ryder. R., Veres. J. P., "Multi-Fidelity Simulation of a Turbofan Engine With Results Zoomed Into Mini-Maps for Zero-D Cycle Simulation," NASA TM-213076, November 2004
  22. Momsi, P., "VIVACE: Overview", VIVACE Forum 1, September 2005
  23. VIVACE Project, http://www.vivaceproject.com/
  24. Gronstedt, T., "Development of methods for analysis and optimization of complex jet engine systems," Ph.D. Thesis, Chalmers University of Technology, Sweden, 2000
  25. Ashleman, R. H., Lavelle, T., Parsons, F., "The National Cycle Program - A flexible system modeling architecture," AIAA 98-3114, July 1998
  26. Gas turbine and Related Equipment Users Centre, http://www.cranfield.ac.uk/sme/pep/gtuc/software/software.htm
  27. NLR Gas turbine Simulation Program GSP http://www.gspteam.com/main/main.shtml
  28. GasTurb, http://www.gasturb.de/Products/GasTurb_11/gasturb_11.html
  29. Jeschke, P., Kurzke, J., Schaber, R., Riegler, C., "Preliminary Gas Turbine Design Using the Multidisciplinary Design System MOPEDS," Transaction of the ASME, Vol. 126, April, 2004, pp.256-264
  30. Mathioudakis, K., Stamatis, A., Tsalavoutas, A., Aretakis. N., "Instructing The Principles Of Gas Turbine Performance Monitoring And Diagnostics By Means Of Interactive Computer Models," ASME 2000-GT-584, 2000
  31. 최동환, 이대성, 현용익, 이상우, 양수석, 차봉준, 손창민, 개스터어빈 엔진 시스템 개발(IV), 항공우주연구원 UCN 0200-25, 1992
  32. 김수용, Kovalevsky, V. P., "21세기 가스터빈 기술 및 적용 전망," 기계와 기술, 제14권 2호, 2002, pp.94-107
  33. 최승주, "두산중공업의 소형가스터빈 개발," Journal of KSME, 제46권 10호, 2006, pp.41-47
  34. 김수용, 오종식, 박무룡, "가스터빈 설계 및 해석 기술," 유체기계저널, 제3권 3호, 2000, pp.50-54
  35. 정석호, "가스터빈의 연소 기술 및 연구 동향," 대한기계학회 춘계학술대회논문집(II), 1992, pp.335-344
  36. 김수용, 박무룡, "산업용 가스터빈 엔진(FT4000계열)의 개발 현황," 기계와 재료, 제7권 3호, 1995, pp.18-27