References
- Chun, S. M., 'Thermohydrodynamic Lubrication Analysis of High-Speed Journal Bearing Considering Variable Density and Variable Specific Heat,' Tribology International, Vol. 37, No.5, pp. 405-413, 2004 https://doi.org/10.1016/j.triboint.2003.12.009
- Wilcock, D. F., 'Turbulence in High Speed Journal Bearing,' Trans. of the ASME, Vol. 72, pp. 825-834, 1950
- Constantinescu, V. N., 'Theory of Turbulent Lubrication,' Proc. Int. Symp. on Lubrication and Wear, University of Houston, pp. 153-213, 1965
- Ng, C. W. and Pan, C. H. T., 1965, 'A Linearized Turbulent Lubrication Theory,' Trans. of the ASME, J of Basic Engineering, Vol. 87, pp. 675-688 https://doi.org/10.1115/1.3650640
- Taylor, C. M., 'Turbulent Lubrication Theory Applied to Fluid Film Bearing Design,' Proc. Inst. Mech. Engrs., Vol. 184, Part 3L, pp. 40-47, 1969-1970
- Constantinescu, V. N., 'Basic Relationships in Turbulent Lubrication and Their Extension to Include Thermal Effects,' Trans. of the ASME, J of Lubrication Technology, Vol. 95, pp. 147-154, 1973 https://doi.org/10.1115/1.3451755
- Safar, Z. and Szeri, A. Z., 'Thermohydrodynamic Lubrication in Laminar and Turbulent Regimes,' Trans. of the ASME, J of Lubrication Technology, Vol. 96, pp. 48-57, 1974 https://doi.org/10.1115/1.3451908
- Szeri, A. Z., Tribology: Friction, Lubrication and Wear, Chapter 5, 'Turbulence, Inertia, and Thermal Effects in Fluid Film Bearings,' Hemisphere Publishing Corp., pp. 229-294, 1980
- Hayward, A. T. J., 'The viscosity of bubbly Oil', National Engineering Laboratory, Fluids Report No. 99, Glasgow, U. K, 1961
- Smith, E. H., 'The Influence of Surface Tension on Bearings Lubricated With Bubbly Liquids', Trans. of the ASME, Jour. of Lub. Tech., Vol. 102, pp. 91-96, 1980 https://doi.org/10.1115/1.3251446
- Abdel-Latif, L. A., Peeken, H. and Benner, J., 'Thermohydrodynamic Analysis of Trust-Bearing With Circular Pads Running on Bubbly Oil (BTHD- The- ory)', Trans. of the ASME, Jour. of Trib., Vol. 107, pp.527-537, 1985 https://doi.org/10.1115/1.3261124
- Chamniprasart, K., AI-Sharif, A., RajagopaI, K. R. and Szeri, A. Z., 'Lubrication with Binary Mixtures: Bubbly Oil', Trans. of the ASME, Jour. of Trib., Vol. 115, pp. 253-260, 1993 https://doi.org/10.1115/1.2920999
- Nikolajsen, J. L., 1999, 'Viscosity and Density Models for Aerated Oil in Fluid-Film Bearings,' STLE, Tribology Transactions, Vol. 42, No.1, pp. 186-191 https://doi.org/10.1080/10402009908982207
- Nikolajsen, J. L., 'The Effect of Aerated Oil on the Load Capacity of Plain Journal Bearing,' STLE, Tribology Transactions, Vol. 42, No.1, pp. 58-62, 1999 https://doi.org/10.1080/10402009908982190
- Chun, S. M., 'A Parametric Study on Bubble Lubrication of High-Speed Journal Bearings,' Tribology International, Vol. 35, No.1, pp. 1-13, 2002 https://doi.org/10.1016/S0301-679X(01)00072-X
- Chun, S. M. and Lalas, D. P., 'Parametric Study of Inlet Oil Temperature and Pressure for a Half-Circumferential Grooved Journal Bearing,' STLE Tribology Transaction, Vol. 35, No.2, pp. 213-224, 1992 https://doi.org/10.1080/10402009208982111
- Boncompain, R., Fillon, M. and Frene, J., 'Analysis of Thermal Effects in Hydrodynamic Bearings,' Trans. of the ASME, Jour. of Trib., Vol. 108, pp. 219-224, 1986 https://doi.org/10.1115/1.3261166
- Chun, S. M., 'Study on Mixing Flow Effects in a High-Speed Journal Bearing,' Tribology International, Vol. 34, No.6, pp. 397-405, 2001 https://doi.org/10.1016/S0301-679X(01)00030-5
- Gazley, C. Jr., 'Heat-Transfer Characteristics of the Rotational Axial Flow Between Concentric Cylinders,' Trans. of the ASME, Vol. 80, No.1, pp. 79-90, 1958
- Lin, H. S., 'Viscosity of Motor Oil,' Federal Mogul, Engineering Report, 1981
- Holman, J. P., Heat Transfer, McGraw-Hill, Inc., pp. 641, 1986