Journal of Mechanical Science and Technology

  • 제20권10호
  • /
  • Pages.1702-1715
  • /
  • 2006
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

An Education Model of a Nano-Positioning System for Mechanical Engineers

  • Lee Dong-Yeon (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST)) ;
  • Gweon Dae-Gab (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology (KAIST))
  • 발행 : 2006.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The increasing use of nano-positioners in a wide variety of laboratory and industrial applications has created a need for nano-mechatronics education in all engineering disciplines. The subject of nano-mechatronics is broad and interdisciplinary. This article focuses on the way nano-mechatronics is taught in department of mechanical engineering at Korea Advanced Institute of Science and Technology (KAIST). As one model of nano-positioning systems, design and experimental methodology is presented in this article. For design phase, the stiffness and resonant frequencies are found analytically and verified by using a commercial finite element analysis program. Next, for experimental phase, various tests are performed to access the performances of the designed nano-positioner, for example, sine-tracking, multi-step response and travel-range check etc. Finally, the definition of 'separation frequency' is described and some comments are discussed.

키워드

참고문헌

  1. Acar, M. and Parkin, R. M., 1996, 'Engineering Education for Mechatronics,' IEEE Transactions on Industrial Electronics, Vol. 43, No.1, pp. 106-112 https://doi.org/10.1109/41.481414
  2. Banik, R., Lee, D. Y. and Gweon, D. G., 2005, 'A High-speed Miniature Screening Gaschromato graph with Flame Ionization Detector,' Journal of Mechanical Science and Technology, Vol. 19, No. 12, pp. 2197-2204 https://doi.org/10.1007/BF02916459
  3. Bojarski, Z., Hetmariczyk, M., Jeziorski, L., Morawiec, H., Slusarski, L. and Wojciechowski, St., 1995, 'Material Science and Engineering Education in Poland,' Materials Science and Engineering A, Vol. 199, pp.27-34 https://doi.org/10.1016/0921-5093(95)09914-X
  4. Chisholm, A. W. J., 1990, 'An Engineering Design Analogy for Engineering Education,' Computers in Industry, Vol. 14, pp. 197-204 https://doi.org/10.1016/0166-3615(90)90123-7
  5. Fraser, C. J., Milne, J. S. and Logan, G. M., 1992, 'An Educational Perspective on Applied Mechatronics,' Mechatronics, Vol. 3, No.1, pp.49-57 https://doi.org/10.1016/0957-4158(93)90037-3
  6. Giurgiutiu, V., Lyons, J., Rocheleau, D. and Liu, W., 2005, 'Mechatrcnics/Microcontroller Education for Mechanical Engineering Students at the University of South Carolina,' Mechatronics, Vol. 15, pp. 1025-1036 https://doi.org/10.1016/j.mechatronics.2005.06.002
  7. Kwon, J., Hong, J., Kim, Y. S., Lee, D. Y., Lee, S. M. and Park, S. I., 2003, 'Atomic force Microscope with Improved Scan Accuracy, Scan Speed and Optical Vision,' Review of Scientific Instruments, Vol. 74, No. 10, pp.4378-4383 https://doi.org/10.1063/1.1610782
  8. Lee, D. Y. and Lee, M. Y., 2005, 'A Flexure Guided Planar Scanner for Scanning Probe Microscope; Part 1: Design and Analysis of Static and Dynamic Properties,' Trans. of the KSNVE, Vol. 15, No.6, pp.667-673 https://doi.org/10.5050/KSNVN.2005.15.6.667
  9. Lee, D. Y. and Gweon, D. G., 2006, 'Pseudo-Resonant Effect on a Flexure-Guided NanoPositioning System,' Journal of the Korean Physical Society, Vol. 48, No.3, pp.363-370
  10. Lee, D. Y., Kim, D. M. and Gweon, D. G., 2006a, 'Design and Evaluation of Two Dimensional Metrological Atomic Force Microscope using a Planar Nanoscanner,' Japanese Journal of Applied Physics, Vol. 45, No.3B, pp.2124-2127 https://doi.org/10.1143/JJAP.45.2124
  11. Lee, D. Y., Lee, M. Y. and Gweon, D. G., 2006b, 'Orthogonality Correction of Planar Sample Scanner for Atomic Force Microscope,' Japanese Journal of Applied Physics, Vol. 45, No. 13, pp. L370- L372 https://doi.org/10.1143/JJAP.45.L370
  12. Lee, D. Y., Lee, M. Y. and Gweon, D. G., 2005, 'A Flexure Guided Planar Scanner for Scanning Probe Microscope; Part 2: Evaluation of Static and Dynamic Properties,' Trans. of the KSNVE, Vol. 15, No. 11, pp. 1295-1302 https://doi.org/10.5050/KSNVN.2005.15.11.1295
  13. Meek, S., Field, S. and Devasia, S., 2003, 'Mechatronics education in the Department of Mechanical Engineering at the University of Utah,' Mechatronics, Vol. 13, pp. 1-13 https://doi.org/10.1016/S0957-4158(01)00058-7
  14. Rizzoni, G. and Keyhani, A., 1995, 'Design of Mechatronic Systems: an Integrated Inter-departmental Curriculum,' Mechatronics, Vol. 5, No.7, pp.845-853 https://doi.org/10.1016/0957-4158(95)00045-7
  15. Smith, S. T., 2000, 'Flexures: Elements of Elastic Mechanisms,' Gordon and Breach Science Publishers, pp. 180
  16. Tan, K. K., Lee, T. H., Dou, H. F. and Lim, S. Y., 1998, 'Various Developments in Mechatronics in Asia,'. Mechatronics, Vol. 8, pp. 777-791 https://doi.org/10.1016/S0957-4158(98)00022-1
  17. UME, C. and Timmerman, M., 1995, 'Mechatronics Instruction in the Mechanical Engineering Curriculum at Georgia Tech,' Mechatronics, Vol. 5, No.7, pp. 723-741 https://doi.org/10.1016/0957-4158(95)00043-5
  18. Ye, X., Peng, W., Chen, Z. and Cai, Y. Y., 2004, 'Today's Students, Tomorrow's Engineers: an Industrial Perspective on CAD Education,' Computer- Aided Design, Vol. 36, pp. 1451-1460 https://doi.org/10.1016/j.cad.2003.11.006