대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제30권10호
  • /
  • Pages.1202-1208
  • /
  • 2006
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

비례솔레노이드 액추에이터를 이용한 압력제어밸브

Pressure Control Valve using Proportional Electro-magnetic Solenoid Actuator

  • 함영복 (한국기계연구원 지능형정밀기계연구본부) ;
  • 박평원 (한국기계연구원 지능형정밀기계연구본부) ;
  • 윤소남 (한국기계연구원 지능형정밀기계연구본부)
  • 발행 : 2006.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an experimental characteristics of electro-hydraulic proportional pressure control valve. In this study, poppet and valve body which are assembled into the proportional solenoid were designed and manufactured. The constant force characteristics of proportional solenoid actuator in the control region should be independent of the plunger position in order to be used to control the valve position in the fluid flow control system. The stroke-force characteristics of the proportional solenoid actuator is determined by the shape (or parameters) of the control cone. In this paper, steady state and transient characteristics of the solenoid actuator for electro-hydraulic proportional valve are analyzed using finite element method and it is confirmed that the proportional solenoid actuator has a constant attraction force in the control region independently on the stroke position. The effects of the parameters such as control cone length, thickness and taper length are also discussed.

키워드

참고문헌

  1. Tanaka., H., 1988, 'FEM Analysis of Solenoid for Proportional Valve,' Power Design, Vol. 26, No.6, pp. 32-41
  2. Tanaka, H., 2000, 'Proportional Solenoid,' Fluid Power System, Vol. 31, No.3, pp. 200-207
  3. LEE, I. Y. and Jung, Y. K., 2001, 'Using Method of Proportional Valve and High Speed On-off Valve for Hydraulic System Control,' Instrument technique, Vol. 9, No.10, pp. 98-105
  4. Lausch, H. and Helduser, S., 2000, 'Development and Optimization of Industrial Proportional PressureValves,' Proceedings of the 45th National Conference on Fluid Power, pp. 509-514
  5. Geibler, G., 2001, 'Modellbildung Von Proportional-magneten Mitttels Konzentrierter Parameter,' Oilhydraulik und Pneumatik, Vol. 45, No.1, pp. 49-52
  6. Suzuki, 1993, 'Reducing Circuit of Proportional 3-Port Valve,' Hydraulics and Pneumatics, Vol. 24, No.2, pp. 206-210
  7. Satoru, H., 1990, 'Numerical Analysis of Dynamic Characteristics of Balance Piston Type Relief Valve,' Hydraulics and Pneumatics, Vol. 28, No.2, pp. 232-238
  8. Ishii, 1986, 'Hydraulic Proportional Control Valve and Servo Valve,' Power Design, Vol. 21, No.12, pp. 42-46
  9. Inoue, R., 1980, 'The Simulation of Pilot-operated Relief Valve,' The BFPR Journal, Vol. 13, No.3, pp. 225-228
  10. Gi-Tae Kweon, 2000, 'Dynamic Analysis of Fast-Acting Solenoid Valves Using Finite Element Method,' Master's Thesis, Kookmin University
  11. Maxwell$^{(R)}$ Ver.9.0, 2002, user manual, Ansoft.
  12. $AMESim^{(R)}$ Ver.4.0 2002, user manual, Imagine
  13. John F. Blackburn, 1960, Fluid Power Control, The M.I.T Press, pp. 181-183
  14. Frank Yeaple, 1990, Fluid Power Design Handbook, Marcel Dekker, Inc., pp. 609-622

피인용 문헌

  1. A Study on Analysis Technique for Solenoid Valve Applicable to Military Vehicle Transmission vol.24, pp.4, 2015, https://doi.org/10.9709/JKSS.2015.24.4.029