반응표면분석법을 이용한 횡자속 선형전동기의 형상최적설계

Optimal Geometric Design of Transverse Flux Linear Motor Using Response Surface Methodology

  • 홍도관 (한국전기연구원 Mechatronics그룹) ;
  • 우병철 (한국전기연구원 Mechatronics그룹) ;
  • 강도현 (한국전기연구원 산업전기연구단)
  • 발행 : 2006.10.01

초록

Thrust force of linear motor is one of the important factor to specify motor performance. In this study, we optimized maximizing the thrust force of TFLM(Transverse Flux Linear Motor) using Response Surface Methodology by the table of orthogonal way. The Response Surface Methodology was well adapted to make the analytical model of the maximum thrust force and enable the objective function to be easily created and a great deal of the time In computation to be saved. Therefore, it is expected that the proposed optimization procedure using the Response Surface Methodology can be easily utilized to solve the optimization problem of electric machine.

키워드

참고문헌

  1. R. Arumugarn, J. F. Lindsay, and R. Krishnan, 'Sensitivity of Pole Arc/Pole Pitch Ration on Switched Reluctance Motor Performance', IEEE lAS Annual meeting, pp,50-54, 1998 https://doi.org/10.1109/IAS.1988.25041
  2. Yamada, H., 'Optimum Design of Thin Linear DC Motor with Logn Strokes', T.IEE Japan, Vol.116-D, No.4, pp.384-389, 1979
  3. Choi, M. S., Kim, Y. Y. and Lee, S. L., 'The Optimum Geometric Design Stators for a Brushless DC Linear Motor', Trans. of KSME A, Vol.23, No.3, pp.442-448, 1999
  4. K. J. Binns, 'Permanent magnet AC generators', Proc. IEEE, Vol.126, No.7, pp.690-696, 1979
  5. T. Alasuvanto, 'Comparison of Four Different Permanent Magnet Rotor Constructions', Int. Conf. on Electrical Machines, pp.1034-1039, 1990
  6. 방덕제,김호종,강도현,'횡자속 선형전동기 추진모듈개발', 한국반도체및디스플레이장비학회 춘계학술대회논문집, pp.138-146, 2004
  7. G. E. P. Box and K. B. Willson, 'On the Experimental Attainment of Optimum Conditions', Journal of the Royal Statistical Society, Series B, Vol.l3, pp,1-14, 1951
  8. D. M. Allen, 'Mean Square Error of Prediction as a Criterion for Selecting Variables', Techno-rnetrics, Vol.13, pp,469-475, 1971 https://doi.org/10.2307/1267161
  9. D. M. Allen, 'The Relation Between Variable Selection and Data Augmentation and a Method for Prediction', Technometrics, Vol.16, pp,125-127, 1974 https://doi.org/10.2307/1267500
  10. G. A. F. Seber, 'Linear Regression Analysis', John Willey, New York, 1977
  11. F. Gillon, P. Brochet, 'Screening and Response Surface Method Applied to the Numerical Optimization of Electromagnetic Devices', IEEE Trans. Mag., Vol.36, 4, pp.1163-1167, 2000. https://doi.org/10.1109/20.877647
  12. Ruowen Rong et el., 'Applying Response Surface Methodology in the Design and Optimization of Electromagnetic Devices', IEEE Trans. Mag., Vol.33, No.2, pp.1916-1919, 1999 https://doi.org/10.1109/20.582665
  13. 홍도관,우병철,강도현,'직교배열표를 이용한 추력을 최대화하기위한 횡자속 선형전동기의 최적설계', 대한전기학회 논문지 제54권,제11호,B권,pp.505-510,2005