Journal of Power Electronics

  • 제6권4호
  • /
  • Pages.290-297
  • /
  • 2006
  • /
  • 1598-2092(pISSN)
  • /
  • 2093-4718(eISSN)
전력전자학회 (The Korean Institute of Power Electronics)
권호 표지

Detent Force Reduction of a Tubular Linear Generator Using an Axial Stepped Permanent Magnet Structure

  • Eid Ahmad M. (Dept. of Electrical Eng., Kyungnam University) ;
  • Lee Hyun-Woo (Dept. of Electrical Eng., Kyungnam University) ;
  • Nakaoka Mutsuo (Dept. of Electrical Eng., Kyungnam University)
  • 발행 : 2006.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Various methods have been discussed to reduce detent force in a tubular permanent magnet type linear single phase AC generator. In particular, the proposed methods depend on variations of the permanent magnet construction. These methods include two approaches in the form of sloped magnets, and conical magnets in addition to the conventional method of optimizing the magnet length. The undesired detent force ripples were calculated by a two dimensional Finite Element Method (FEM). Moreover, the generated electromotive force in the stator coils was calculated for each configuration of the permanent magnet. The experimental results agreed well with those obtained from the FEM-based simulations. Sufficient reduction in the detent force was achieved over the range of 40% while the root mean square of the output voltage was maintained. It was found that sloping the permanent magnet decreased the detent force and at the same time increased the generated rms voltage of the AC generator. The performance of the designed linear AC generator was evaluated in terms of its efficiency, total weight, losses, and power to weight ratio.

키워드

참고문헌

  1. W. M. Arshad, 'A low-leakage linear transverse-flux machine for a free-piston generator', Ph. D. thesis, Royal Institute of technology, Stockholm, Sweden, 2003
  2. J. F. Eastham, 'Novel synchronous machines: linear and disc', Proc. Inst. Elect. Eng., vol. B-137, 1990
  3. M. Watada, K. Yanashima, Y. Oishi, and D. Ebihara, 'Improvement on characteristics of linear oscillatory actuator for artificial hearts', IEEE Trans. Magn., vol. 29, pp. 3361-3363, 1993 https://doi.org/10.1109/20.281176
  4. K.-C. Lim, J.-P. Hong and G.-T. Kim, 'The novel technique considering slot effect by equivalent magnetizing current', IEEE Trans. Magn., Vol. 35, No. 5, pp. 3691-3693, 1999 https://doi.org/10.1109/20.800633
  5. K.-C. Lim, J.-K. Woo, G.-H. Kang, J.-P. Hong and G.-T. Kim, 'Detent force minimization techniques in permanent magnet linear synchronous motors', IEEE Trans. Magn., Vol. 38, No. 2, pp. 1157-1160, 2002 https://doi.org/10.1109/20.996296
  6. Ju Lee, H. W. Lee, Y. D. Chun, M. Sunwoo, and J. P. Hong, 'The performance prediction of controlled PM LSM in various design schemes by FEM', IEEE Trans. Magn., Vol. 36, No. 4, pp. 1902-1905, 2000 https://doi.org/10.1109/20.877818
  7. A. Benhama, A. C. Williamson, and A. B. J. Reece, 'Force and torque computation from 2-D and 3-D finite element field solutions', IEE Proc.-Electr. Power Appl., Vol. 146, No. 1, pp. 25-31, 1999 https://doi.org/10.1049/ip-epa:19990219
  8. H. Arof, Ahmad M. Eid and K. M. Nor, 'Cogging force reduction using special magnet design for tubular permanent magnet linear generators', 39th International Universities Power Engineering Conference (UPEC'2004), pp. 523 527, Vol. (2), 6-8 September 2004, Bristol, UK
  9. Ahmad M. Eid, Sung-Jun Kim, Hyun-Woo Lee and Mutsuo Nakaoka, 'Tubular Permanent Magnet Linear Synchronous Generator Design For Linear Engine Applications', The Korean Institute of Electrical Engineers, Electrical Machinery and Energy Conversion System Society (KIEE-EMECS) Autumn Annual Conference 2005, pp. 17-19, October 20-22, 2005, Gwangju, Korea
  10. Ahmad Eid, Kang-Ju Sung, Choi Seok Won, Han Ho Dong, H.W. Lee and M. Nakaoka, 'Cogging force minimization using stepped permanent magnets in linear generators', 2005 Korea Wind Energy Association (KWEA) General Meeting and International Symposium, pp. 188-196, December 9-10, 2005, Jun Ju, Korea
  11. W. R. Cawthorne, 'Optimization of a brushless permanent magnet linear alternator for use with a linear internal combustion engine', Ph. D. West Virginia University, USA, 1999