Abstract
The design of sand mat should be reviewed by the behaviour of excess pore pressure which is obtained by combining characteristics of soft ground with the permeability of sand mat. In this paper, in order to investigate the distribution of hydraulic gradient of sand mat, a banking model test was performed using dredged sand as materials of sand mat, and these results were compared by the numerical analysis results utilizing Terzaghi's consolidation equation. The results show that the pore pressure was influenced by the settlement increasing in the central area of sand mat as the height of embankment increases, and uprising speed of excess pore pressure due to residing water pressure is delayed compared with the results of numerical analysis. Finally, the construction of sand mat should be spreaded to reduce the increased hydraulic gradient at the central area of embankment.
샌드매트의 설계는 연약지반의 압밀침하특성과 매트의 투수성이 상호 결합된 연성압밀해석에 의해 얻어지는 간극 수압거동에 의해 검토되어야 한다. 본 연구에서는 샌드매트의 수두분포에 대하여 Terzaghi 1차원 압밀방정식을 이용한 수치해석을 실시하여 준설모래를 샌드매트 재료로 이용한 성토모형실험의 결과와 비교분석하였다. 실험결과 단계 성토가 증가하면서 간극수압은 성토중심부에서 증가되는 침하량의 영향을 받고 있다. 그리고 잔류된 간극수압 영향으로 간극수압의 상승속도가 수치해석결과보다 지연되고 있다. 따라서 최종적으로 샌드매트 시공은 성토중심부에서 증가되는 동수구배를 저감시키도록 포설되어야 한다.