DOI QR코드

DOI QR Code

Evaluation Model for Restraint Effect of Pressure Induced Bending on the Circumferential Through-Wall Crack Opening Considering Plastic Behavior

소성거동을 고려한 원주방향 관통균열 열림에 미치는 압력유기굽힘의 구속효과 평가 모델

  • Published : 2006.09.01

Abstract

This paper presents the model for evaluating restraint effect of pressure induced bending (PIB) on the circumferential through-wall crack opening displacement (COD), which considers plastic behavior of crack. This study performed three-dimensional elastic-plastic finite element (FE) analyses for different crack angle, restraint length, pipe geometry, stress level, and material conditions, and evaluated the influence of each parameter on the PIB restraint effect on COD. Based on these evaluations and additional perfectly-plastic FE analyses, a closed-form model to evaluate the restraint effect of PIB on the plastic crack opening of circumferential through-wall crack, was proposed as functions of crack angle, restraint length, radius to thickness ratio, axial stress corresponding to an internal pressure, and normalized COD evaluated from linear-elastic crack opening condition.

Keywords

References

  1. Pipe Break Task Group, 1984, 'Evaluation of Potential for Pipe Breaks,' NUREG-1061, Vol. 3
  2. Zahoor, A., 1989, 'Ductile Fracture Handbook,' EPRI NP-6301-D
  3. Rahman, S., Ghadiali, N., Wilkowski, G., Moberg, F., Brickstad, B., 1998, 'Crack-openingarea Analyses for Circumferential Through-wall Cracks in Pipes - Part III : Off-center Cracks, Restraint of Bending, Thickness Transition and Weld Residual Stresses,' Int. J. Press. Ves. & Piping, Vol. 75,. pp. 397-415 https://doi.org/10.1016/S0308-0161(97)00083-5
  4. Ghadiali, S., Rahman, S., Choi, Y.H., and Wilkowski, G.M, 1996, 'Deterministic and Probabilistic Evaluations for Uncertainty in Pipe Fracture Parameters in Leak-Before-Break and In-Service Flaw Evaluations,' NUREGI CR-6443
  5. Wilkowski, G., Olson, R., Scott, P., 1997, 'State-of the-Art Report on Piping Fracture Mechanics,' NUREGICR-6540
  6. Scott, P., Olson, R., Bockbrader, J., Wilson, M., Gruen, B., Morbitzer, R., Yang, Y., Williams, C., Burst, F., Fredette, L., Ghadiali, N., 2005, 'The Battelle Integrity of Nuclear Piping (BINP) Program Final Report,' NUREGICR-6837
  7. Miura, N., 2001, 'Evaluation of Crack Opening Behavior for Cracked Pipes Effect of Restraint on Crack Opening,' ASME-PVP, Vol.423, pp. 135-143
  8. Norris, D.M. and Chexal, B., 1987, PICEP : Pipe Crack Evaluation Program (Revision 1), EPRI NP-3596-SR, Rev.1
  9. Kim, J.W. and Park, C.Y., 2001, 'Effect of Restraint of Pressure Induced Bending on Crack Opening Evaluation for Circumferential ThroughWall Cracked Pipe,' Trans. of KSME (A), Vol.25, No.11, pp.1873-1880
  10. Kim, J.W., 2004, 'Evaluation of Restraint Effect of Pressure Induced Bending on the Elastic-Plastic Crack Opening Behavior,' Int. J. Press. Ves. & Piping, Vol. 81, pp. 355-362 https://doi.org/10.1016/j.ijpvp.2004.02.011
  11. ABAQUS Users Manual, Version 6.3, Hibbitt, Karlson & Sorensen, 2000