Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Creep Characterization of 9Cr1Mo Steel Used in Super Critical Power Plant by Conversion of Stress and Strain for SP-Creep Test

SP-Creep 시험의 응력 및 변형률 환산에 의한 초임계압 발전설비용 9Cr1Mo강의 크리프 특성 평가

  • 백승세 (전북대학교 대학원 정밀기계공학과) ;
  • 박정훈 (전북대학교 대학원 정밀기계공학과) ;
  • 유효선 (전북대학교 기계항공시스템공학부, 자동차신기술연구센터)
  • Published : 2006.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Due to the need of increasing thermal efficiency, supercritical pressure and temperature have been utilized in power plants. It is well known that 9Cr1Mo steel is suitable fer use in power plants operating at supercritical conditions. Therefore, to ensure the safety and the soundness of the power plant, creep characterization of the steel is important. In this study, the creep characterization of the gCr1Mo steel using small punch creep(SP-Creep) test has been described. The applied load and the central displacement of the specimen in SP-Creep test have been converted to bearing stress and strain of uc, respectively. The converted SP-Creep curves clearly showed the typical three-stage behavior of creep. The steady-state creep rate and the rupture time of the steel logarithmically changed with the bearing stress and satisfied the Power law relationship. Furthermore, the Larson-Miller parameter of the SP-Creep test agreed with that of the tensile creep test. From the comparison with low Cr-Mo steels, the creep characteristics of 9Cr1Mo steel proved to be superior. Thus, it can be confirmed that the 9Cr1Mo steel is suitable for supercritical power plant.

Keywords

References

  1. Klotz, U. E. and Solenthaler, C., 1999, 'Alloy Composition and Mechanical Properties of 9-12% Chromium Steels with Martensitic-Austenitic Microstructure,' Materials Science & Eng., pp. 292-299
  2. Orlova A. and Bursik J., 1998, 'Microstructural Development During High Temperature Creep of 9% Cr Steel,' Materials Science & Eng., pp. 39-48 https://doi.org/10.1016/S0921-5093(97)00708-9
  3. Viswanathan, R. and Gehl, S. M., 1992, 'LifeAssessment Technology for Power-Plant Component,' JOM Feb., pp. 34-42
  4. Webster, G. A. and Ainsworth, R. A., 1993, 'High Temperature Component Life Assessment,' Chapman & Hall, pp. 1-319
  5. Kim, H. J., Chung, Y. K. and Park, J. J., 2000, 'Development of Small-Specimen Creep Tester for Life Assessment of High Temperature Components of Power Plant,' Trans. of the KSME(A), Vol. 24, No. 10, pp. 2597-2602
  6. Kwon, I. H. and Yu, H. S., 2001, 'Cryogenic Fracture Toughness Evaluation for Austenitic Stainless Steels by Means of Unloading Compliance Method,' KSME International Journal, Vol. 15, No.1, pp. 26-34 https://doi.org/10.1007/BF03184795
  7. Dobes, F. and Milicka, K., 2002, 'On the Monkman-Grant Relation for Small Punch Test Data,' Materials Science & Engineering A, Vol. 336, pp. 245-248 https://doi.org/10.1016/S0921-5093(01)01975-X
  8. Yang, Z. and Wang, Z., 2003, 'Relationship Between Strain and Central Deflection in Small Punch Creep Specimens,' Pressure Vessels and Piping, Vol. 80, pp. 397-404 https://doi.org/10.1016/S0308-0161(03)00069-3
  9. Baek, S. S, Na, S. H., Na, E. G. and Yu, H. S., 2001, 'Development of Evaluation Technique of High Temperature Creep Characteristics by Small PunchCreep Test Method,' Trans. of the KSME(A), Vol. 25, No. 12, pp. 1995-2001
  10. 丸山公一，中島英治， 2002，'高溫强度の材料科學,' 內田老鶴圃, pp. 100-120
  11. Sherby, O. D., Klundt, R. H. and Miller, A. K., 1977, 'Flow Stress, Subgrain Size, and Subgrain Stability at Elevated Temperature,' Metall. Trans. A, Vol. 8, pp. 843-850 https://doi.org/10.1007/BF02661565