DOI QR코드

DOI QR Code

Development of Telerobotic Surgery System with Single-Master Multi-Slave

단일마스터 멀티슬레이브형 텔레로보틱스 수술시스템 개발

  • Published : 2006.08.01

Abstract

Medical robotics and computer aided surgery in general, and robotic telesurgery in particular, are promising applications of robotics. In this paper, we shows a novel single-master (PHANTOM based single-master multi-slave telerobotic system) multi-slave system using two parallel mechanism micromanipulators as a slave device. After a general introduction to the systems structure and configuration of telerobotic system, a manipulation control strategy to build the system that human and both manipulators perform the cooperative manipulation, is introduced, followed by its kinematic analysis, mapping method, and experimental results.

Keywords

References

  1. S. S. Sastry, M. Cohn, and F. Tendick, 'Milli-robotics for remote, minimally invasive surgery,' J. Robot. Auton. Syst., vol. 21, no. 3, pp. 305-316, Sept. 1997 https://doi.org/10.1016/S0921-8890(96)00082-6
  2. J. E. Colgate, 'Robust Impedance Shaping Telemanipulation,' IEEE Trans. on Robotics and Automation, vol. 9, no. 4, pp. 374-384, 1993 https://doi.org/10.1109/70.246049
  3. T. Tanikawa and T. Arai 'Development of a nicro-manipulation system having a two-fingered micro-hand,' IEEE Trans. on Robotics and Automation, vol. 15, no. 1, pp. 152-162, Feb 1999 https://doi.org/10.1109/70.744610
  4. J. A. Thompson and R. S. Fearing, 'Automating microassembly with ortho-tweezers and force sensing,' in Proc. IEEE/RSJ Int. Conf. Intelligent Robots Systems, Maui, HI, pp. 1327-1334, 2001 https://doi.org/10.1109/IROS.2001.977166
  5. N. Ando, M. Ohta, K. Gonda, and H. Hashimoto, 'Micro teleoperation with parallel manipulator,' 2001 IEEE/SME International Conference on Advanced Intelligent Mechtronics Proc., pp. 63-68, July 2001 https://doi.org/10.1109/AIM.2001.936431
  6. Richard P. Paul 'Robot manipulators: Mathematics, programing, and control,' Cambridge, MA: The MIT Press, 1981
  7. T. Yoshikawa 'Manipulability of robotic mechanisms,' The International Journal of Robotics Research, vol. 4, no. 1, pp. 3-9, Dec 1985 https://doi.org/10.1177/027836498500400201
  8. R. Bonitz and T. Hsia, 'Force decomposition in cooperating manipulators using theory of metric spaces and generalized inverses,' in Proc. of the IEEE International Conference on Robotics and Automation, vol. 2, pp. 1521-1527, May 1994 https://doi.org/10.1109/ROBOT.1994.351372
  9. E. F. Fichter, 'A stewart platform-based manipulator: General theory and practical construction,' The International journal of Robotics Research, vol. 5-2, pp. 157-182, 1986 https://doi.org/10.1177/027836498600500216
  10. K. Cleary and T. Arai, 'A prototype parallel manipulator: Kinematics, construction, software, workspace results, and singularity analysis,' Proc. of the 1991 IEEE International Corference on Robotics and Automation, pp. 566-571, 1991 https://doi.org/10.1109/ROBOT.1991.131641
  11. K. Kosuge, T. Itoh, Toshio Fukuda, and Manabu Otsuka, 'Telemanipularion system based on task-oriented virtual tool,' IEEE International Conference on Robot and Automation, pp. 351-356, 1995 https://doi.org/10.1109/ROBOT.1995.525309
  12. B. Hannoford and R. Anderson, 'Experimental and simulation studies of hard contact in force reflecting teleoperation,' Proc. of 1988 IEEE International Conference on Robotics and Automation, pp. 584-589, 1988 https://doi.org/10.1109/ROBOT.1988.12114