Abstract
Rock mass classification systems such as RMR and Q system have been widely served as a simple empirical approach for the design of various rock mass structures in the stage of site survey as well as under the construction. For the RQD determination, the boring is partially carried out and what is more, the survey boring is not normally carried out under construction. Therefore RQD is frequently determined by empirical method or indirect method. Since it is difficult to determine the discontinuity characteristics such as RQD, spacing, persistence, filling and so on, it is essential to develop suitable and simple systems without drilled core and a cert 없 n number of representative parameters. One of the primary objectives of the classification systems for a practicing engineer has been to make it simple to use as a preliminary design tool for the structures in rock mass. In the present study, the modifications for both the RMR and GSI system are suggested by authors to introduce new classification system as well as to improve the scope of some of the existing classification systems for a practicing engineer.
현재 가장 많이 사용되고 있는 암반분류법인 RMR 이나 Q 분류법을 이용하여 조사단계에서 암반평가를 할 때, 평가요소의 하나인 RQD 값을 구하기 위한 시추작업이 제한적으로 이루어지고 있고, 또한 시공단계에서도 시추작업은 거의 이루어지지 않고 있는 실정이다. 실제 현장조사에서는 RQD값은 일반적으로 유추되거나 간접적인 방법을 통해서 이루어지고 있는 실정이다. 또한 암반내의 절리간격조사도 여러 군의 절리가 존재할 경우 그룹별 간격의 측정이 용이하지 않으며 불연속면의 연속성 등 불연속면의 특성에 관한 측정이 쉽지 않다는 것이다. 절리간격 요소도 설제로는 RQD와 중복되는 요소로서 시추 코아에 의존하지 않고 보다 쉽게 암반평가를 실시할 수 있는 새로운 암반분류법의 개발이 필요하다. 이를 위해서 요구되는 요소들을 측정하지 않고도 암반의 구조적인 형태와 절리의 거칠기와 변형정도로 표시되는 불연속면의 표면적인 조건만을 관찰함으로써 암반평가를 실시할 수 있는 방법인 GSI 의 요소들을 RMR 방법과 결합하여 새로운 암반분류법을 제시하고자 하는 것이다.