References
- 김원범, 1997, 강재의 해수환경중에서의 피로강도평가에 관한 연구, 히로시마대학 공학박사(Dr Eng.) 학위논문 (일본어)
- 강성원, 이승윤, 2000, 'CO2 용접이음재의 대기 및 해수중에서의 회전굽힘 피로강도에 관한 연구,' 대한조선학회 논문집, 제 37권, 제 2호, pp. 118-126
- 권영중, 주동국, 1996, '선박의 표면조도에 관한 연구: 추정법 및 선박성능에 미치는 영향,' 대한조선학회 논문집, 제 33권, 제 2호, pp. 31-35
- 김성찬, 윤장호, 藤本由紀夫, 1999, '부식효과를 고려한 선체구조 검사계획안의 최적화,' 대한조선학회 논문집, 제 36권, 제 4호, pp. 137-146
- 백점기, 박영일, 1998, '유조선 종강도부재의 확률론적 부식속도 예측모델의 개발,' 대한조선학회 논문집, 제 35권, 제2호, pp. 83-93
- Ebara, R., 1988, 'Corrosion Fatigue Test Method for the Material,' Bulletin of the Society of Naval Architects of Japan, Vol. 703. pp. 34-43 (in Japanese)
- Endo, K., Kornai, K. and Murayama, S., 1982, 'Influence of CI-Concentration on Corrosion Fatigue Crack Growth of an Austenitic Stainless Steel,' Transactions of the Japan Society of Mechanical Engineers, Vol. 48, No. 436. pp. 1489-1495(in Japanese) https://doi.org/10.1299/kikaia.48.1489
- Iwata. M., Yajima, H., Huang, Y., Yamamoto, M., Kim, W.B. and Saito. T., 1997, 'A Study on the Fatigue Strength of Rusting Decayed Steel Plates,' The West-Japan Society of Naval Architects, No. 93, pp. 97-102(in Japanese)
- Komai, K., Minoshima, K. and Yamamoto. K., 1984,' Corrosion Fatigue Crack Growth in High Tensile Strength Steel under Cathodic Overprotection,' Zairyo, Vol. 33. No. 374, pp. 1407-1413(in Japanese)
- Nagai, K., Mori, M., Yajima, H. Yamamoto, Y. and Fujimoto, Y., 1977, 'Studies on the Evaluation of Corrosion Fatigue Crack Initiation.' Journal of The Society of Naval Architects of Japan. Vol. 142, pp. 239-250(in Japanese)
- Nishida, M., 1971, Stress Concentration, Morikita-shuppan(in Japanese)
- Ogawa, K., Saruki, K., Asano. T. and Furuta, T., 1987, 'Influence of Notch Sensitivity on Fatigue Strength of Steel Sheets Corroded with Salt-Water,' Zairyou, Vol. 20, No. 411, pp. 1375-1380(in Japanese)
- Okazaki, S., Nakamura. H. and Tsunenari, T., 1979, 'On Corrosion Fatigue Strength of High Tensile Steels,' Zairyo, Vol. 28, No. 312, pp. 887-893(in Japanese)
- SR220 Final Report, 'A Study on the Corrosion Fatigue Strength of Ballast Tank,' Shipbuilding Research Association of Japan. (1996), pp. 411-417(in Japanese)
- The Iron and Steel Institute of Japan, The Japan Institute of Metals and Japan Society for the Promotion of Science, 1987. Proceedings of the 3rd Symposium of Environmental Strength of the Steel (in Japanese)
- Yuasa, M. and Watanabe, T., 1994, 'Fatgiue Strength of Corroded Weld Joints,' Journal of The Society of Naval Architects of Japan, Vol. 176, pp. 481-489 (in Japanese)