References
- 권오성 (2004), 암반의 풍화도가 암반근입 말뚝의 지지거동에 미치는 영향, 박사학위논문, 서울대학교
- 이명환, 조천환, 유한규, 권형구 (2003), '국내 암반에 근입된 현장타설말뚝의 소켓벽면 거칠기에 관한 연구', 한국지반공학회학술대회 논문집, pp.431-438
- 정성준, 김정환, 이현근, 김명모 (2005), 'LRFD 설계법에 따른 인천대교 현장 타설 말뚝의 지지력 산정', 대한토목학회 학술대회 논문집. pp.3929-3932
- Baquelin, F. (1982), 'Rules for the structural design of foundations based on the selfboring pressuremeter test', Symp. on the Pressuremeter and Its Marine Application, IFP, Paris, pp.347-362
- Barton, N. R and Choubey, V. (1977), 'The shear strength of rock joints in theory and practice', Rock Mech., Vol.10, pp.1-54 https://doi.org/10.1007/BF01261801
- Boresi, A. P. (1965), Elasticity in engineering mechanics. PrenticeHall, Englewood Cliffs, N.J
- Clayton, C. R. and Milititsky, J. (1983), 'Installation effects and the performance of bored pile in stiff clay', Ground Engineering, Vol.16, No.2, pp.17-22
- Clear, C. A. and Harrison, T. A. (1985), Concrete pressure on formwork. Report 108, Construction Industry Research and Information Association, London
- Hoek, E. and Brown, E. T. (1997), 'Practical estimates of rock mass strength', Intnl. J. Rock Mech. & Mining Sci. & Geomechanics Abstracts. Vol.34, No.8, pp.1165-1186 https://doi.org/10.1016/S1365-1609(97)80069-X
- Horvath, R. G., Kenny. T. C. (1979), 'Shaft resistance of rock-socketed drilled piers', ASCE National Convention, Proceeding of the Symposium of Deep Foundations, Atlanta, pp.183-214
- Horvath, R. G., Kenny. T. C. and Kozicki, p., (1983), 'Method of improving the performance of drilled piers in weak rock', Canadian Geotechnical Journal, Vol.20, pp.758-772 https://doi.org/10.1139/t83-081
- Indraratna, B., Haque, A. and Aziz, N. (1999), 'Shear behavior of idealized in filled joints under constant normal stiffness', Geotechnique, Vol.49, No.3, pp.331-355 https://doi.org/10.1680/geot.1999.49.3.331
- Johnston, I. W., Lam, T. S. K. and Williams, A. F. (1987), 'Constant normal stiffness direct shear testing for socketed pile design in weak rock', Geotechnique, Vol.37, No.1, pp.83-89 https://doi.org/10.1680/geot.1987.37.1.83
- Kim, S. I., Jeong, S. S., Cho, S. H. and Park, I. J. (1999), 'Shear Load Transter Characeteristics of Drilled Shafts in Weathered Rocks', Journal of Geotechnical and Geoenvironmental Engineering, ASCE, pp.999-1010
- Lam, T. S. K., and Johnston I. W. (1982), 'A constant normal stiffness direct shear machine', Proceedings of the Seventh Southest Asian Geotechnical Conference', Hong Kong, pp 805-820
- Ladanyi, B., and Archambault, G. (1970), 'Simulation of shear behaviour of a jointed rock mass', Proc. 11th Symp. on Rock mechanics. Rock Mechanics: Theory and Practice, pp.105-125
- Lings, M. L., Ng, C. W. W., and Nash, D. F. T. (1994), 'The lateral pressure of wet concrete in diaphragm wall panels cast under bentonite', Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol.107, pp.163-172
- Nam, M. S., (2004), Improved design for drilled shafts in rock, Ph.D. Thesis, University of Houston
- O'Neill, M. W., Townsend, F. C., Hanssan, K. M., Buller, A. and Chan, P. S. (1995), Load transfer for drilled shafts in intermediate geomatrials, FHWA-RD-95-XXX Draft report U.S. Department of Transportation
- Seidel J. P, Harberfield C. M. (1995), 'Towards an understanding of Joint Roughness', Rock Mechanics and Rock Engineering Journal, Vol.28, No.2, pp.69-92 https://doi.org/10.1007/BF01020062
- Seidel, J. P. and Collingwood, B. (2001), 'A new socket roughness factor for prediction of rock socket shaft resistance', Canadian Geotechnical Journal, Vol.38, No.1, pp.138-153 https://doi.org/10.1139/cgj-38-1-138