초록
토목이나 환경분야에 적용되는 시추공을 이용한 P파와 S파 속도검층 수행 시 여러 고려해야 할 사항이 있다. 토양이나 풍화암 등 연약층에 설치한 케이싱이 탄성파 측정에 미치는 영향, 사용되는 주파수에 따라 측정되는 탄성파 속도의 변화 등이 그것이다. 또한 속도검층으로부터 구한 탄성계수는 동적특성을 반영한다. 이러한 과제를 극복하기 위해서는 탄성파시험이 설정된 시추공에서는 가급적 케이싱을 설치하지 않고 공벽을 유지하는 시추 기술을 개발, 적용하도록 하고, 속도검층의 목적에 맞는 주파수 대역의 시험법을 적용하도록 해야 하겠다. 또한 내진설계자들이 속도검층에서 구한 동탄성계수와 실내역학시험에서 구한 정탄성계수와의 차이점을 인식하고 적절히 사용할 수 있도록 조언하는 것도 필요하다.
Cares should be taken when performing the P and S wave velocity loggings in engineering and environmental fields. Some of them are the effect of casing, which is installed to prevent the borehole collapsing when the drilling is done on the loose ground such as soil and/or soft rock, and the discrepancy of the velocities of the same media according to the difference of the source wave frequency spectrum. The elastic moduli obtained from the P and S wave velocity logging have the dynamic characteristics. To overcome these difficulties, the following suggestions are recommended; (1) develop and apply a careful drilling technique that can keep the borehole wall without a casing, and (2) apply the logging methods with the suitable frequency bandwidth for the object of the velocity logging. It is important to make the aseismological engineers understand the difference between the dynamic elastic moduli and the static ones obtained from mechanical test, and to advise them to use the information properly.