High Temperature Oxidation of NiCoCrAlY-(Ta, Re, Ir) Coatings for Gas Turbines

가스터빈 엔진부품용 NiCoCrAlY-(Ta, Re, Ir) 코팅의 고온산화특성

  • Choi, J.H. (School of Advanced Materials Science and Engineering, Sungkyunkwan University) ;
  • Lee, D.B. (School of Advanced Materials Science and Engineering, Sungkyunkwan University)
  • 최정호 (성균관대학교 신소재공학부) ;
  • 이동복 (성균관대학교 신소재공학부)
  • Published : 2006.06.30

Abstract

The high velocity oxy-fuel sprayed coatings of 38Ni-23Co-20Cr-11Al-3Y-5Ta, 25Ni-34Co-20Cr-11Al-3Y-2Re and 32Ni-34.5Co-22Cr-11Al-0.5Ir (in wt%) were oxidized at 1000 and $1100^{\circ}C$ in air in order to find the alloying effect of Ta, Re and Ir on the oxidation properties of the NiCoCrAlY-base coatings. The primary phase of the coatings was $Ni_3Al$. The oxides formed on the coatings consisted primarily of ${\alpha}-Al_2O_3$, together with some $CoCr_2O_4,\;CoAl_2O_4$, and $Al_5Y_3O_{12}$. Tantalum oxidized to $Ta_2O_5$ and $Ta_2O_{22}$. However, no oxides of Re and Ir were detected by XRD owing to their thermodynamic inertness and/or their small amount.

Keywords

References

  1. E. Y. Lee, R. R Biederman, R. D. Sisson, Mater. Sci. Eng., A 121 (1989) 467 https://doi.org/10.1016/0921-5093(89)90803-4
  2. B. Wang, J. Gang, C. Sun, R. F. Huang, L. S. Wen, Mater. Sci. Eng., A 357 (2003) 39 https://doi.org/10.1016/S0921-5093(03)00254-5
  3. J. L. Smialek, G. H. Meier, Superalloys II, C. T. Sims, N. S. Stoloff, W. C. Hagel(Ed.), Wiely-Interscience Publication, USA (1987) 311
  4. D. Manceau, F. Crabos, A. Malie, B. Pieraggi, High-Temperature Protection of Metals 5, R. Streiff(Ed.), Trans Tech Publication, Uetikon-Zurich (2001) 607
  5. M. Frances, M. Vilasi, M. Mansour-Gabr, J. Steinmetz, P. Steinmetz, Mater. Sci. Eng., 88 (1987) 89 https://doi.org/10.1016/0025-5416(87)90071-1
  6. L. Zhao, E. Lugscheider, Surf. Coat. Technol., 149 (2002) 231
  7. W. Brandl, D. Toma, J. Kruger, H. J. Grabke, G. Matthaus, Surf. Coat. Tech., 94-95 (1997) 2 https://doi.org/10.1016/S0257-8972(97)00484-2
  8. D. Toma, W. Brandl, U. Koster, Surf. Coat. Tech., 120-121 (1998) 8
  9. W. Beele, N. Czech, W. J. Quadakkers, W. Stamm, Surf. Coat. Tech., 94-95 (1997) 41 https://doi.org/10.1016/S0257-8972(97)00484-2