DOI QR코드

DOI QR Code

A Study on the Improvement of Static Torque Characteristic in Permanent Magnet Stopping Motor with Claw Pole

Claw Pole Type 영구자석형 스테핑 모터의 정토크 특성 향상에 관한 연구

  • 임승빈 (한양대 전기공학과) ;
  • 손영규 (한양대 대학원 전기공학과) ;
  • 김영태 (국립원주대 전기과) ;
  • 이주 (한양대 공대 전자전기공학부)
  • Published : 2006.09.30

Abstract

This paper analyzed the characteristics of the claw pole PM stewing motor by using 3D FEM. As the magnetization occurs along the z-axis of the motor, it is necessary to apply 3D FEM for analysis of the claw pole PM stewing motor. Considering the computation time, reducing the number of the analysis model is effective method of the methods of the reducing analysis time. By using the "Design Of Experiments(DOE)", efficient analysis was able to be done. To see the effects of the design factors, the 3D FEM is applied only to the selected models. As the design factors, the teeth selected models, the number of turns and the permanent magnet overhang was selected.

본 논문에서는 3차원 FEM을 이용하여 Claw pole stoning motor의 특성을 해석하였다. Claw pole stewing motor는 구조상 z-축 방향으로 자화가 발생하고 모델의 특성상 3차원 FEM해석이 필수적이다. 해석 시간을 고려해 볼 때 목적하고자 하는 성능을 갖는 모터 설계 시 시간을 효율적으로 줄이기 위한 방법 중 하나는 해석 대상의 개수를 줄이는 것이다. 이에 본 논문에서는 실험계획법(Design of Experiments)을 이용하여 Claw pole stewing motor의 해석 및 설계 시 중요 변수인 영구자석, 폴형상, 권선수의 설계 변수를 설정하여 이 설계변수의 조합으로 나오는 해석 모델의 개수를 최소화하고 이렇게 줄어든 최적의 모델을 선정하여 3차원 FEM으로 해석하여 특성을 살펴보았다.

Keywords

References

  1. Takeo Ishikawa, and Ryuichi Takakusagi 'Static Torque Characteristics of Permanent Magnet Type Stepping Motor with Claw Poles', IEEE Transaction on Magnetics, Vol 36 (2000) 1854-1857 https://doi.org/10.1109/20.877806
  2. Takashi Kenjo, Stepping motors and Their Microprocessor Controls, Clarendon press. Oxford 2 Edition pp44, 1994A
  3. Tatsuya Kikuchi, and Takashi Kenjo 'Developing an Educational Simulation Program for the PM Stepping Motor' IEEE Transaction on Education, vol. 45, no. 1, February 2002
  4. YouGuang Guo, and Jian Guo Zhu 'Comparative Study of 3-D Flux Electrical Machines With Soft Magnetic Composite Cores' IEEE Transaction on Industry Applications, vol. 39, no. 6,, Novemver/December 2003
  5. D.Ebihara, Y.Nakate and M. Watada 'FLUX DISTRIBUTION TO INDUCTOR IN CLAW POLE LINEAR PULSE MOTOR' IEEE Transaction on Industry Applications, vol. 29, no. 6. November 1993
  6. Takeo Ishikawa, Masahiro Matsuda and Michio Matsunami 'Finite Element Analysis of Permanent Magnet Type Stepping Motors' IEEE Transaction on Magnetics, vol. 34, no. 5. September 1998
  7. K. Koibuchi and K. Sawa, 'Three dimensional FEM claculation of permanent magnet type stepping motor with claw poles,' in Proc. 2nd Small Motor International Conference, Seoul, Korea, pp. 171-174, September 1996
  8. Fisher, R.A 'The Design of Experiments', 4th Edition, Oliver and Boyd, Edinburgh, 1947