Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

An Adoptive Current Control Scheme of an AC Servo Motor for Performance Improvement of a Servo Drive

서보 드라이브 성능 향상을 위한 AC 서보 전동기의 적응형 전류 제어

  • 김경화 (서울산업대학교 전기공학과)
  • Published : 2006.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

An MRAC-based adaptive current control scheme of an AC servo motor is presented for the performance improvement of a servo drive. Although the predictive current control is known to give ideal transient and steady-state responses, its steady-state response my be degraded under motor parameter variations. To overcome such a limitation, the disturbances caused by the parameter variations will be estimated by using an MRAC technique and compensated by a feedforward control. The proposed scheme does not require the measurement of the phase voltage unlike the conventional disturbance estimation scheme using observer. The asymptotic stability is proved. The proposed scheme is implemented using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.

서보 드라이브의 성능 향상을 위해 AC 서보 전동기의 MRAC (Model Reference Adaptive Control) 기반 적응 전류 제어 기법이 제시된다. 인버터 구동 전류 제어 기법 중 예측형 전류 제어 기법은 이상적인 과도 응답 및 정상 상태 응답을 주지만, 전동기 파라미터 변화 시 정상상태 응답 성능이 저하된다. 이러한 제한 점을 극복하기 위해 파라미터 변화에 의한 외란이 MRAC 기법에 의해 추정되어 전향 제어에 의해 보상된다. 제안된 방식은 기존의 외란 추정 방식과 달리 관측기 구성을 위한 인버터의 상전압 측정을 필요로 하지 않는다. 제안된 적응 제어 방식의 점근안정성과 효과적으로 서보 드라이브에 적용될 수 있음이 입증된다. 제안된 방식이 DSP TMS320C31을 이용하여 구현되고 유용성이 시뮬레이션과 실험을 통해 입증된다.

Keywords

References

  1. P. C. Krause, Analysis of Electric Machinery. New York: McGraw-Hill, 1986
  2. D. W. Novotny and R. D. Lorenz, Introduction to field orientation and high performance AC drives. IEEE IAS Tutorial Course, 1986
  3. T. M. Rowan and R. J. Kerkman, 'A new synchronous current regulator and an analysis of current-regulated PWM inverters', IEEE Trans. Ind. Appl., vol. 22, no. 4, pp. 678-690, 1986 https://doi.org/10.1109/TIA.1986.4504778
  4. H. L. Huy and L. A. Dessaint, 'An adaptive current control scheme for PWM synchronous motor drives: analysis and simulation', IEEE Trans. Power Elec., vol. 4, no. 4, pp. 486-495, 1989 https://doi.org/10.1109/63.41777
  5. L. Ben-Brahim and A. Kawamura, 'Digital control of induction motor current with deadbeat response using predictive state observer', IEEE Trans. Power Elec., vol. 7, no. 3, pp. 551-559, 1992 https://doi.org/10.1109/63.145143
  6. L. Zhang, R. Norman, and W. Shepherd, Long-range predictive control of current regulated PWM for induction rrotor drives using the synchronous reference frame, IEEE Trans. Contr. Syst. Tech., vol. 5, no. 1, pp. 119-126, 1997 https://doi.org/10.1109/87.553670
  7. D. S. Oh, K. Y. Cho, and M. J. Youn, A discretized current control technique with delayed input voltage feedback for a voltage-fed PWM inverter, IEEE Trans. Power Elec., vol. 7, no. 2, pp. 364-373, 1992 https://doi.org/10.1109/63.136254
  8. K. H. Kim, I. C. Baik, and M. J. Youn, 'Simple and robust digital current control scheme of permanent magnet synchronous motor using titre delay control approach,' IEE Electronics Letters, vol. 35, no. 12, pp. 1027-1028, 1999 https://doi.org/10.1049/el:19990686
  9. K. H. Kim, I. C. Baik, G. W. Moon, and M. J. Youn, 'A current control for a permanent magnet synchronous motor with a simple disturbance estimation scheme,' IEEE Trans. on Contr. Svst, Tech., vol. 7, no. 5, pp. 630-633, 1999 https://doi.org/10.1109/87.784427
  10. J. J. E. Slotine and W. Li, Applied Nonlinear Control. Prentice-Hall International Editions, 1991
  11. Y. D. Landau, Adaptive Control - The Model Reference Approach. Marcel Dekker, New York, 1979
  12. H. W. van der Broeck, H. C. Skudelny, and G. V. Stanke, 'Analysis and realization of a pulsewidth modulator based on voltage space vectors,' IEEE Trans. Ind. Appl., vol. 24, no. 1, pp. 142-150, 1988 https://doi.org/10.1109/28.87265
  13. TMS320C3x Users Guide. Texas Instrument, 1990
  14. TMS320C30 Assembly Language Tools Users Guide. Texas Instrument, 1990