References
- 池浩, 高田正和, 宮內邦雄, 吉田淸太: 理硏報告 52(1976), 195-209
- 池浩, 宮內邦雄, 吉田淸太: 理硏報告, 53(1978), 1-17
- 池浩:塑性과加工,20-227(1979), 1094-1100
- T. Sasada, S. Norse, H. Moshina : Trans. ASME J. Lubr. Technol., 103 (1981), 195-202
- 加藤康司: 日本金屬學會會報, 22-4(1983), 302-311
- H. Ike, K. Yoshida, M. Murakawa : Wear, 72(1981), 143-155 https://doi.org/10.1016/0043-1648(81)90364-1
- 池浩:塑性과加工, 24-265(1983), 179-186
- 池浩:塑性과加工, 24-272(1983), 933-941
- 池浩:塑性과加工, 27-300(1986), 63-71
-
H. Ike, K. Yoshida:
$Proc.3^{rd}$ Int. Colloquium on Lubrication in metal Working, ed. by Bartz, W. J. & Wolff, J.,(1982), Paper No.18., Technische Akademie Esslingen - H. Ike : Metal Transfer and Galling in Metallic Systems, ed .by Merchant, H.D.& Bhansali, K.J(1987), 27-62, TMS-AIME
- 小野寺建次, 池浩: 塑性과加工, 26-291(1985), 416-423
-
Y. Shimada, H. Ike, et al:
$Proc.17^{th}$ I.D.D.R.G (1992),16-23 - 池浩: 塑性과加工, 35-397(1994), 145-151
- H. Ike : Wear, 224(1999), 73-88 https://doi.org/10.1016/S0043-1648(98)00329-9
- 池浩: 塑性과加工, 29-328(1988), 471-477
- H. Ike, K. Tsuji, M. Takase : Wear, 252 (2002), 48-62 https://doi.org/10.1016/S0043-1648(01)00854-7
- H. Ike: J.Mater.Process.Technol.,138(2003),250-255 https://doi.org/10.1016/S0924-0136(03)00080-3
- T. Wanheim, N. Bay, A. S. Petersen: Wear, 28 (1974), 251-258 https://doi.org/10.1016/0043-1648(74)90165-3
- 池浩: 塑性과加工, 42-485(2001), 487-492
- A. Makinouchi, H. Ike, M. Murakawa, N. Koga : Wear, 128(1988),109-122 https://doi.org/10.1016/0043-1648(88)90178-0
- H. Ike, A. Makinouch,: Wear, 140(1990), 17-30 https://doi.org/10.1016/0043-1648(90)90119-U
- H. Ike,:Contact Mechanics, edited by Raous, M. et al.,(1995), 275-286, Plenum
- 池浩, 牧野內昭武: 塑性과加工, 32-366 (1991), 848-855
- W. R. D. Wilson, S. Sheu : Int.J.Mech.Sci., 30-7 (1988), 475-489
- M. P. F. Sutcliffe : Int.J.Mech.Sci., 30-11(1988), 847-868
- 濟木弘行, 肱岡勝昭:機論 C, 46-402 (1980), 217-226
- W. R. D. Wilson, D.-F Chang : Trans. ASME, J. Tribol., 118-1(1996), 83-89
- H. Ike : J. Mater. Process. Technol., 60 (1996), 363-368 https://doi.org/10.1016/0924-0136(96)02355-2
- H. Ike: Proc. Int. Tribol. Conf. Yokohama 1995, 3(1996), 1743-1748
- 池浩: 塑性과加工, 33-383 (1992), 1394-1399
- 松原茂夫, 工藤英明:塑性과加工, 32-364 (1991), 589-596
- 池浩:塑性과加工, 36-411 (1995), 369-376
- 池浩, 錢文軍:塑性과加工, 36-411 (1995), 377-383
- H. Ike, M. Plancak : J. Mater. Process. Technol., 80-81 (1988), 101-107 https://doi.org/10.1016/S0924-0136(98)00101-0
- H. Ike, M. Plancak : Advanced Technology of Plasticity 1999, Ed. M.Geiger, (1999), 907-912, Springer
- 池浩, 井上純: 塑性과加工, 30-336 (1989), 97-102
- H. Ike: Wear, 258 (2005), 1404-1410 https://doi.org/10.1016/j.wear.2004.09.063
- H. Ike, S. Kuriyama, A. Kohno : Advanced Technology of Plasticity 2002, 1(2002), 385-390, JSTP
- H. Ike, M. Plancak : Metal Forming 2000, wd. By M. Pietrzyk, et al., (2000), 63-69, Balkema, Rotterdam
- 池浩: 塑性과加工, 30-338 (1989), 321-326