Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

The Origin and Effect of Hot Spot Phenomena on Judder Vibration in Automotive Disk Brake

디스코 브레이크에서 열섬 현상이 발생되는 원인과 저더진동에 미치는 영향

  • Published : 2006.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

Hot spot phenomenon is caused by non-uniform contact area between brake pad and disk frequent braking. Brake disk deformed by locally concentrated heat increases magnitude of frictional vibration. And this deformation can highly influence the judder vibration. In this experimental study, vibration and hot spot was measured in accordance with rotation of disk and pressure of master cylinder for finding the factors that causes hot spot phenomena. For comparing hot spot aspects with mode shapes of disk, mode shapes were measured by conducting modal test, and analyzed by using finite element analysis. Relation between hot spot phenomenon, and mode shape, pressure of master cylinder and rotation speed of disk respectively, was achieved by hot spot measurement and frequency analysis.

Keywords

References

  1. Lee, K., Suh, K., Kuk, J. and Chyun, I. 2001, 'Analytical Study in Brake Judder Reduction of Medium Bus' , KSAE, Vol. 9, No.4, pp. 148 - 156
  2. Mohamed, K. A., 1997, 'Brake Judder Analysis: Case Studies' , SAE 972027
  3. Lee, K. and Palph, B. D. 1998, 'Condition of Frictional Contact in Disk Brake and Their Effect on Brake Judder' , SAE 980598
  4. Ramachandra Rao, V. T. V. S., Ramasubramanian, H. and Seetharamu, K. N., 1989, 'Analysis of Temperature Field in Brake Disk for Fade Assessment' , Wearme Stoffuebertrag, Vol. 24, No.1, pp. 9-17 https://doi.org/10.1007/BF01599500
  5. Vries, A. and Wagner, M., 1992, 'The Brake Judder Phenomenon' , SAE Technical Paper Series, SAE920554 (SP-914), pp. 25 - 33
  6. Dweib, A. H. and D'Souza, A. F., 1990, 'Self Excited Vibrations Induced by Dry Friction, Part 1: Experimental Study' , Journal of Sound and Vibration, Vol. 137, No. 2, pp. 163 - 175 https://doi.org/10.1016/0022-460X(90)90786-Y
  7. Youn, S. and Han, M., 1999, 'Study on Brake Judder Caused by Disk Runout and Disk Thickness Variation' , KSAE, Vol. 7, No.2, pp. 378 -386
  8. Lee, B., Cho, C., Lee, S. and Cho, H ., 2004, 'Computer Simulation on Mechanical Evaluation of Ceramic Matrix Composite Automobile Brake Disks' , PacRim5 Special Issue, Vol. 112, No.5, pp. S423 - S427
  9. Gassmann, S. and Engel. H. G., 1993, 'Excitations and Transfer Mechanism of Brake Judder,' SAE 931880
  10. Cho, H ., Kim, M., Maeng, J. and Cho, C. 2005, 'Analysis of the Cause for Judder Vibration of Automotive Disk Brake' , KSAE 2005 Fall Conference, pp. 1056 - 1061