초록
전기전도도가 높은 구리선 도파로에 THz 전자기파의 결합은 THz 유선방식의 전파에 있어 테라파의 크기 및 주파수 특성을 결정짓는 중요한 요인 중의 하나이다. 본 연구에서는 직경 $480{\mu}m$, 길이 23 cm의 구리선 도파로에 테라파를 전파시켜 1 THz 주파수 범위를 가진 THz 펄스를 측정하였다. 도파로와 transmitter chip 또는 receiver chip 사이의 공극 간격을 최대 $275{\mu}m$까지 확대하여 송신부와 수신부의 결합 특성을 접촉상태와 비교 분석하였다. 실험결과 송신부의 결합민감도가 수신부보다 약 3배 이상 높게 나타났으며 수신부에서 도파로와 receiver사이의 공극을 통하여 테라파가 공기 중으로 전파됨을 알 수 있었다. 또한 구리선 도파로에 pin hole를 위치시켜 pin hole의 직경에 따른 테라파의 변화를 연구하였으며 대부분의 THz field는 구리선 표면에 분포됨을 확인할 수 있었다.
The coupling between copper wire and a THz electromagnetic wave is one of the important factors to build up the magnitude and spectrum of a THz wave. We measured a I THz spectrum range THz pulse into a $480{\mu}m$ diameter and 23cm long copper wire waveguide. We measured THz pulses up to $275{\mu}m$ air gap between the end of the copper wire and transmitter or receiver chips. The coupling sensitivity of the transmitter is 3 times bigger than that of the receiver. The THz pulses propagated to air by the end of the receiver-side copper wire tip acting as a transmitter antenna. We confirmed that the THz field concentrates near the copper wire surface by opening the pin hole to the copper wire waveguide.