Korea-Australia Rheology Journal

  • 제18권2호
  • /
  • Pages.83-90
  • /
  • 2006
  • /
  • 1226-119X(pISSN)
  • /
  • 2093-7660(eISSN)
한국유변학회 (The Korean Society of Rheology)
권호 표지

High-pressure rheology of polymer melts containing supercritical carbon dioxide

  • Lee Sang-Myung (Applied Rheology Center Dept. of Chemical Engineering, Sogang University) ;
  • Han Jae-Ro (Applied Rheology Center Dept. of Chemical Engineering, Sogang University) ;
  • Kim Kyung-Yl (Applied Rheology Center Dept. of Chemical Engineering, Sogang University) ;
  • Ahn Young-Joon (Applied Rheology Center Dept. of Chemical Engineering, Sogang University) ;
  • Lee Jae-Wook (Applied Rheology Center Dept. of Chemical Engineering, Sogang University)
  • 발행 : 2006.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Supercritical carbon dioxide ($scCO_2$) has advantages of being incorporated in polymer with high solubility and of being recovered easily by depressurizing. $scCO_2$ reduces the viscosity of polymer melt and it is expected to be use as a plasticizing agent. In this work, we studied on the effect of $scCO_2$ on the rheological properties of polymer melts during extrusion process. Slit die attached to twin screw extruder was used to measure the viscosity of polymer melts plasticized by supercritical $CO_2$. A gas injection system was devised to accurately meter the supercritical $CO_2$ into the extruder barrel. Measurements of pressure drop within the die, confirmed the presence of a one phase mixture and a fully developed flow during the measurements. The viscosity measurement of polypropylene was performed at experimental conditions of various temperatures, pressures and $CO_2$ concentrations. We observed that melt viscosity of polymer was dramatically reduced by $CO_2$ addition.

키워드

참고문헌

  1. Chiou, J.S., J.W. Barlow and D.R. Paul, 1985, Plasticization of glassy polymers by $CO_2$, J. Appl. Polym. Sci. 30, 2633-2642 https://doi.org/10.1002/app.1985.070300626
  2. Elkovitch, M.D., D.L. Tomasko and L.J. Lee, 1999, Supercritical carbon dioxide assisted blending of polystyrene and poly (methyl methyacrylate), Polym. Eng. Sci. 39, 2075-2084 https://doi.org/10.1002/pen.11599
  3. Gould, R.F., 1965, Plasticization and Plasticizer Processes, Washington, D.C
  4. Han, C.D. and C.Y. Ma, 1983, Rheological properties of mixtures of molten polymer and fluorocarbon blowing agent. I. Mixtures of low-density polyethylene and fluorocarbon blowing agent, J. Appl. Polym. Sci. 28, 831-850 https://doi.org/10.1002/app.1983.070280234
  5. Han, C.D. and C.Y. Ma, 1983, Rheological properties of mixtures of molten polymer and fluorocarbon blowing agent. II. Mixtures of polystyrene and fluorocarbon blowing agent, J. Appl. Polym. Sci. 28, 851-860 https://doi.org/10.1002/app.1983.070280235
  6. Lacombe, R.H. and I.C. Sanchez, 1976, Statistical thermodynamics of fluid mixtures, J. Phys. Chem. 80, 2568-2580 https://doi.org/10.1021/j100564a009
  7. Laun, H.M., 1983, Polymer melt rheology with a slit die, Rheol. Acta 22, 171-185 https://doi.org/10.1007/BF01332370
  8. Leblanc, J.L., 1976, New slit die rheometer: some results with a butadiene-styrene block copolymer, Polymer 17, 235-240 https://doi.org/10.1016/0032-3861(76)90107-5
  9. Lee, M.H., C.B. Park and T. Tzoganakis, 1999, Measurements and modeling of PS/supercritical $CO_2$ solution viscosities, Polym. Eng. Sci. 39, 99-109 https://doi.org/10.1002/pen.11400
  10. Lee, M.H., C. Tzoganakis and C.B. Park, 2000, Effects of supercritical $CO_2$ on the viscosity and morphology of polymer blends, Adv. Polym. Tech. 19(4), 300-311 https://doi.org/10.1002/1098-2329(200024)19:4<300::AID-ADV6>3.0.CO;2-6
  11. Park, C.B., A.H. Behravesh and R.D. Venter, 1998, Low density microcellular foam processing in extrusion using $CO_2$, Polym. Eng. Sci. 38, 1812-1823 https://doi.org/10.1002/pen.10351
  12. Rauwendaal, C. and F. Fernandez, 1985, Experimental study and analysis of a slit die viscometer, Polym. Eng. Sci. 25, 765-771 https://doi.org/10.1002/pen.760251207
  13. Ritchie, P.D., 1972, Plasticisers, Stabilisers and Fillers, Illiffe Books Ltd., London
  14. Royer, J.R., Y.J. Gay, J.M. Desimone and S.A. Khan, 2000, High-pressure rheology of polystyrene melts plasticized with $CO_2$: Experimental measurement and predictive scaling relationships, J. Polym. Sci.: Part B: Polym. Phys. 38, 3168-3180 https://doi.org/10.1002/1099-0488(20001201)38:23<3168::AID-POLB170>3.0.CO;2-E
  15. Sanchez, I.C. and R.H. Lacombe, 1978, Statistical Thermodynamics of Polymer Solutions, Macromolecules 11, 1145-1156 https://doi.org/10.1021/ma60066a017
  16. Sato, Y., K. Fujiwara et al., 1999, Solubilities and diffusion coefficients of carbon dioxide and nitrogen in polypropylene, highdensity polyethylene and polystyrene under high pressures and temperatures, Fluid Phase Equilibria 162, 261-276 https://doi.org/10.1016/S0378-3812(99)00217-4