References
- Janez, G. and Roman, S., 'Influence of laser surface melt-hardening conditions n residual stresses in thin plates,' Surface and Coating Technology, Vol. 100-101, pp. 455-4580, 1998 https://doi.org/10.1016/S0257-8972(97)00670-1
- Katsamas, A. I. and Haidemenopouloos, G. N., 'Laser beam carburizing of low-alloy steels,' Surface and Coatings Technology, Vol. 139, pp. 183-191, 2001 https://doi.org/10.1016/S0257-8972(00)01061-6
- Selvan, J. S., 'Effect of laser surface hardening on En18(AISI 5135) steel,' Journal of Material Processing Technology, Vol. 91, pp. 29 -36, 1999 https://doi.org/10.1016/S0924-0136(98)00430-0
- Cruz, P. D. L., Oden, M. and Ericsson, T., 'Effect of laser hardening on the fatigue strength and fracture of a B-Mn steel,' Int. J. Fatigue, Vol. 20, pp. 389-398, 1998 https://doi.org/10.1016/S0142-1123(98)00010-3
- Pantelis, D. I., Bouyiouri, E., Kouloumbi, N. and Vassiliou, P., 'Wear and corrosion resistance of laser surface hardened structural steel,' Surface and Coatings Technology., Vol. 298, pp. 127-134, 2002 https://doi.org/10.1016/S0257-8972(02)00495-4
- Lo, K. H., Cheng, F. T. and Man, H. C., 'Laser transformation hardening of AISI 400C martensitic stainless steel for higher cavitation erosion resistance,' Surface and Coating Technology, Vol. 173, pp. 96-104, 2003 https://doi.org/10.1016/S0257-8972(03)00347-5
- Hoshi, H. and Chung, I. S., 'Induction Hardening,' J. of the Korean Society for Heat Treatment, Vol. 12, No. 3, pp. 251-269, 1999
- Shao, T., Hua, M. and Tam, H. Y., 'Impact wear behavior of laser hardened hypoeutectoid 2Cr13 martensite stainless steel,' Wear, Vol. 255, No. 1-6, pp. 444-455, 2003 https://doi.org/10.1016/S0043-1648(03)00417-4
-
Park, J. S., Lee, O. Y., Song, K. H. and Han, Y. H., 'Surface Hardening of SM45C Steel by
$CO_2$ Laser,' J. of the Korean Society for Heat Treatment, Vol. 8, No. 1, pp. 44-52, 1995 - Yoo, Y. T., Shin, H. J. and Ahn, D. G., 'Characteristics of Laser surface Hardening for SM45C Medium Carbon Steel using Continuous Wave Nd:YAG Laser,' KSPE, Vol. 22, No. 11, pp. 51-58, 2005