참고문헌
- 김원철,황영철,안창윤(2005),현장타설말뚝의 잔류응력 분포에 관한 연구,한국지반환경공학회 논문집,한국지반환경공학회,제6권 제1호,pp. 45-51
- 김원철,황영철,황성식(2002),암반에 근입된 현장타설말뚝의 정재하시험결과와 지지력이론식의 비교,한국지반환경공학회 논문집,한국지반환경공학회,제3권 제4호,pp. 51-58
- 남정봉,서보국,김명학(2004),풍화암에 근입된 현장타설말뚝의 지지력 산정평가,대한토목학회 정기학술대회,pp. 2378-2383
- 백규호,사공명(2003),암반에 근입된 현장타설말뚝의 지지력 산정기준에 대한 평가,한국지반공학회논문집,한국지반공학회,제19권 제4호,pp 95-105
- 사공명,백규호(2003),Hoek-Brown 공식을 이용한 현장타설말뚝의 주면마찰력 산정, 한국지반공학회논문집,한국지반공학회,제19권 제1호,pp. 209-220
- 사공명,백규호(2004),크기효과를 고려한 암반에 근입된 현장타설말뚝의 주변마찰력,한국지반공학회논문집,한국지반공학회,제20권 제9호,pp. 115-123
- 사공명,천병식(2005),암반에 근입된 현장타설말뚝의 주면마찰력 크기 효과에 대한 고찰,2005 대한토목학회 정기학술대회,pp. 3949-3952
- 이명환,조천환,유한규,권형구(2003),국내 암반에 근입된 현장 타설말뚝의 소켓벽면 거칠기에 관한 연구,한국지반공학회 봄학술발표회,pp. 431-438
- 이영휘,김용준(2003),암반의 경계조건을 고려한 절라면 직접전단시험기 개발, 한국지반공학회논문집,한국지반공학회,제19권 제2호,pp. 147-157
- 이인모,홍은수,배석일,이석원(2002),암석의 절리면 거칠기 정량화 기법 개발을 통한 절리면 전단강도 특성 분석,한국지반공학회 논문집,한국지반공학회,제18권 제4호, pp 229-238
- 이혁진,김홍택(2006),암반에 근입된 현장타절말뚝의 주면부 거동에 영향을 미치는 변수분석을 위한 수치해석, 대한토목학회 논문집,대한토목학회,제26권 제6C호,pp. 395-406
- 장명환,양형식(1999),암반구조물의 수치해석을 위한 입력자료의 비교분석, 터널과 지하공간,한국암반공학회 논문집,한국암반공학회,제9권,pp. 221-229
- 정상섬,설훈일,정우현(2005),굴착변 거칠기 및 GSI를 이용한 암반 근입 현장타설말뚝의 주면 하중전이힘수 산정,2005 대한토목학회 정기학술대회,pp. 3937-3940
- 정상섬,정우현,설훈일(2005),일정수직강성시험을 통한 암반근입 현장타설말뚝의 주면마찰력특성분석,지반공학공동학술발표회 논문집,pp. 489-498
- 조천환,이명환,김성회,이혁진,유한규(2003),국내 현장타설말뚝의 주면 접촉부에 대한 일정강성도 전단시험,한국지반공학회 봄학술발표회 논문집,pp. 147-152
- 조천환,이명환,유한규,권형구,박언상(2003),암반에 근입된 현장타설말뚝의 벽면거칠기 특성,2003,한국지반환경공학회 논문집,한국지반환경공학회,제4권 제2호,pp. 5-13
- 조천환,이혁진,이명환(2003), 암반의 일축압축강도를 이용한 암반에 근입된 현장타설말뚝의 주면 저항력 산정 방볍, 한국지반공학회 기초기술학술발표회,pp. 59-72
- 천병식,김원철,서덕동(2004),IGM에 근입된 말뚝의 지지력 해석을 위한 기준침하량 결정방법 제안,한국지반환경공학회 논문집,한국지반환경공학회,제5권 제2호,pp. 17-30
- 천병식,김원철,서덕동,윤우현(2004),현장티설말뚝의 하중전이 시험 결과를 이용한 IGM 이론의 적용성 평가,한국지반공학회 논문집,한국지반공학회,제20권 6호,pp. 29-40
- 천병식,김원철,최용규,서덕동(2003),현장타설말뚝의 정재하시험에 의한 지지력과 이론식에 의한 지지력과의 비교,한국지반공학회 논문집,한국지반공학회,제19권 제2호,pp. 237-246
- 홍원표,여규권,이재호(2004),대구경 현장타설말뚝의 침하특성 사례연구, 2004 대한토목학회 정기학술대회, pp. 1324-1329
- AASHTO (2000) Standards specifications for highway bridges, American Association of State Highway and Transportation officials
- Aurora, R. P. and Reese, L. C. (1977). Field tests of drilled shafts in clay-shales, Proc. 9th Int. Can! Soil Mechanics and Foundation Engineering, pp. 371-376
- Brett, Gunnink, and Chad, Kiehne (2002) Capacity of drilled shafts in Burlington limestone, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 128, No.7, pp. 539-545 https://doi.org/10.1061/(ASCE)1090-0241(2002)128:7(539)
- Canadian Geotechnical Society (1992) Foundation Engineering Manual
- Carter, J. P. and Kulhawy, F. H. (1988) Analysis and design of drilled shaft foundations socketed into rock, 1493-4, Cornell University
- Collingwood, Benjamin, B. E. (2000) The effects of construction practices on the per- formance of rock socketed bored piles, Ph. D. Thesis, Monash University
- FHWA (1999) Drill Shafts: Construction procedures and design methods., National High- way Institute
- GEO (1996) Pile design and construction, Geotechnical Engineering Office, Hongkong
- Gibson, G. L. (1973) Field and laboratory investigation for design of rock socketed caiss- ons on a multi-story building founded in sound limestone, M. Eng. Sc. Thesis, Carleton University, Ontario
- Gupton, C. and Logan, T. (1984) Design guidelines for drilled shafts in weak rock in South Florida, Preprint, Annual Meeting of South Florida Branch of ASCE, Miami, FL
- Hassan, K. M. and O'Neill, M. W. (1997) Side load transfer mechanisms for drilled shafts in soft argillaceous rock, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 123, No.2, pp. 145-152 https://doi.org/10.1061/(ASCE)1090-0241(1997)123:2(145)
- Hoek, E., Carranza-Torres, C. T., and Corkum, B. (2002) Hoek-Brown failure criterion - 2002 edition. Proc. North American Rock Mechanics Society meeting
- Horvath, R. G. and Kenny, T. C. (1979) Shaft resistance of rock socketed drilled piers, ASCE, Annual Convention
-
Hughes, T. J.
${\infty}$ R., Taylor, R. L., Sackman, J. L., Curnier, A., and Kanoknukulchai, W. (1976) A finite element method for a class of contact-impact problems, J. Comp. Methods in Appl. Mech. and Engrg., Vol. 8, pp. 249-276 https://doi.org/10.1016/0045-7825(76)90018-9 - Johnston, I. W. and Lam, T. S. K. (1989) Shear behaviour of regular triangular concrete- rock joints-analysis, Jnl. Geotech. Engg. ASCE Vol. 115, No.5, pp. 711-727 https://doi.org/10.1061/(ASCE)0733-9410(1989)115:5(711)
- Kulhawy, F. H. and Phoon, K. K. (1993) Drilled shaft side resistance in clay soil to rock, Proc. Conf. on design and performance of deep foundations - piles and piers in soil and soft rock. Geotechnical Special Publication No. 38. ASCE, pp. 172-183
- Ladanyi, B. and Archambault, G. (1970) Simulation of shear behaviour of a jointed rock mass, Proc. 11TH Symp. on Rock Mechanics: Theory and Practice, pp. 105-125
- McKenzie, I. M. (1969) Foundation load tests on Sydney sandstone, Rock Mechanics Symposium, University of Sydney, pp. 173-180
- McVay, M. C., Townsend, F. C., and Williams, R. C. (1992) Design of socketed drilled shafts in limestone, Journal of the Geotechnical Engineering Division, ASCE, Vol. 118, No. 10, pp. 1626-1637 https://doi.org/10.1061/(ASCE)0733-9410(1992)118:10(1626)
- NAVFAC (1986) Foundation and earth structures, Design Manual Department of Navy, Naval Facilities Engineering Command
- Parkin, A. K. and Donald, I. B. (1975) Investigation for rock socketed piles in Melbourne mudstone, Proceedings of the Second Australia-New Zealand Conference on Geomechanics, Brisbane, pp. 195-200
- Pells, P. J. N., Rowe, R. K., and Turner, R. M. (1980) An experimental investigation into side shear for socketed piles in sandstone, Proceedings of the International Conference on structural foundations on rock
- Reese, L. C. and O'Neill, M. W. (1988) Drilled shafts. Construction procedures and design methods. FHWA-HI-88-042, Federal Highways Administration, Washington D. C.
- Rosenburg, P. and Journeaux, N. L. (1976) Friction and end bearing tests on bedrock for high capacity socket design, Canadian Geotechnical Journal, Vol. 13, No.3, pp. 324-333 https://doi.org/10.1139/t76-033
- Reynolds, R. T. and Kaderabeck, T. J. (1980) Miami limestone foundation design and construction, Preprint No. 80-546, South Florida Convention, ASCE
- Seidel, J. P. (1993) The analysis and design of piles socketed into weak rock, Ph. D. Thesis, Monash University
- Tomlinson, M. J. (1977) Pile design and construction practice, Viewpoint publications, Cement and concrete association, London
- Williams, A. E, Johnston, I. W, and Donald, I. B. (1980) The design of socketed piles in weak rock. Intl. Conf. structural foundations on rock