초록
본 연구에서는 상동지역 중석광 광미를 콘크리트용 혼화재료로 사용하기 위한 연구의 일환으로 자기충전콘크리트의 분체로서 적용가능성을 검토하였다. 상동지역 중석광 광미를 혼합한 시멘트 페이스트의 유변학적 특성을 검토하기 위하여 구속수비 및 점도계를 이용하여 평균소성점도 및 항복응력을 측정하였으며 가상수막이론을 적용하여 검토하였다. 그리고 광미를 혼합한 자기충전콘크리트의 자기충전성 평가는 일본 토목학회에서 제시한 기준안을 적용하여 검토하였으며, 역학적 특성은 압축강도, 쪼갬인장강도 및 탄성계수를 측정하여 검토하였다. 실험결과 광미의 혼합률이 증가함에 따라 구속수비와 평균소성점도는 감소하였으며, 가상수막 두께는 증가하는 경향을 나타냈다. 또한, 광미를 혼합한 자기충전콘크리트의 자기충전성 검토 결과는 유동성 평가기준인 슬럼프 플로우 500 mm 도달시간의 경우 광미의 혼합률이 증가함에 따라 다소 증가하였고 재료 분리저항성 및 충전성 평가 결과는 기준을 만족하는 경향을 나타내고 있었다. 역학적 특성 검토 결과는 압축강도의 경우 광미의 혼합률이 증가함에 따라 압축강도는 감소하였고, 쪼갬인장강도 및 탄성계수는 보통 콘크리트의 유사한 경향을 나타내었다.
This study has focused on the possibility for recycling of tailings from the sangdong tungsten mine as powder (TA) of self-compacting concrete (SCC). The experimental tests for entrapped water ratio were carried out in accordance with the specified method by Okamura. The rheological measurements of cement paste were conducted by using a commercially digital Brookfield viscometer (Model LVDV-II+) equipped with cylindrical spindles, also tests for slump-flow, time required to reach 500 mm of slump flow (sec), time required to flow through V-funnel (sec) and filling height of U-box test (mm) were carried out in accordance with the specified by the Japanese Society of Civil Engineering (JSCE). The results of this study, entrapped water ratio was decreased with increasing replacement of TA. Thickness of pseudo water film was increased, and mean plastic viscosity was decreased with increasing replacement of TA. And slump-flow of SCC was decreased with increasing replacement of TA. But time required to reach 500 mm of slump flow (sec), time required to flow through V-funnel (sec) and filling height of U-box test (mm) were satisfied a prescribed range. The mechanical properties including compressive strength, splitting tensile strength and elastic modulus were checked with the requirements specified by Korean Industrial Standard (KS). The compressive strength of SCC was decreased with increasing replacement of TA, splitting tensile strength and elastic modulus were similar to those of normal concrete.