DOI QR코드

DOI QR Code

강곡선 플레이트거더 복부판의 중간수직보강재 소요강성에 관한 연구

The Rigidity of Transverse Intermediate Stiffener of Horizontally Curved Plate Girder Web Panels

  • 이두성 (동국대학교 산업기술연구원) ;
  • 박찬식 (동국대학교 토목환경공학과) ;
  • 이성철 (동국대학교 토목환경공학과)
  • 투고 : 2006.03.07
  • 심사 : 2006.04.27
  • 발행 : 2006.07.31

초록

실 설계에서 적용되는 강곡선 플레이트거더교의 기하학적인 설계범위 내에서 횡방향변형이 충분히 지지된 강곡선 플레이트거더 복부판의 극한전단강도는 비록 직선복부판에 비해 후좌굴강도는 감소할지라도 탄성좌굴강도가 상대적으로 증가한다. 또한 강곡선 플레이트거더 복부판의 극한전단강도는 후좌굴강도를 포함한 직선플레이트거더 복부판의 극한전단강도와 같은 크기를 발현하고 있음이 여러 연구를 통해서 입증되었다. 본 연구에서는 강곡선 플레이트거더 복부판이 극한전단강도를 발현하기 위한 중간수직보강재의 소요강성에 관한 수치해석연구를 수행하였다. 수치해석결과로부터 후좌굴거동이 존재하는 강곡 선플레이트거더 복부판이 후좌굴강도를 충분히 발현하기 위해서는 현행 Guide Specifications(AASHTO, 2003)의 중간수직보강재 강성이 후좌굴거동 시에 단순지지역할을 하기에는 부족한 것으로 조사되었으며, 이를 기초로 전단좌굴강도비에 따른 소요강성식을 제안하였다.

In this study, the ultimate shear strength behavior of transversely stiffened curved web panels was investigated through nonlinear finite element analysis. It was found that if the transverse stiffener has a sufficient rigidity, then curved web panels used in practical designs are able to develop the postbuckling strength that is equivalent to that of straight girder web panels having the same dimensional and material properties. The nonlinear analysis results indicate that in order for curved web panels to develop the potential postbuckling strength. The rigidity of the transverse stiffener needs to be increased several times the value obtained from the Guide Specifications (AASHTO, 2003). However, in the case of thick web panels where the shear design is governed by shear yielding, the stiffener rigidity does not have to be increased. From the analysis results, a simple design formula is suggested for the rigidity of transverse stiffener under strength limit state.

키워드

참고문헌

  1. 한국도로교통협회(2005) 도로교 설계기준
  2. 이성철, 이두성, 박찬식(2004) 강곡선거더교 복부판의 전단강도에 관한 연구. 2004 대한토목학회 학술발표회 구두논문집
  3. 이두성(2004) 휨과 전단의 상호작용을 고려한 강곡선 플레이트거더 복부판의 극한거동. 공학박사학위논문, 동국대학교
  4. 이두성, 박찬식, 이성철(2006) 강곡선 복부판의 극한전단강도에 관한 실험연구, 대한토목학회 논문집, 게재가
  5. AASHTO(2002) Standard Specifications for Highway Bridges, 17th ed, American Association of State Highway and Transportation Officials, Washington DC
  6. AASHTO(2003) AASHTO Guide Specifications for Horizontally Curved Steel Girder Highway Bridges. American Association of State Highway and Transportation Officials, Washington DC
  7. Hanshin Highway Public Corporation (1988) Guidelines for the design of Horizontally Curved Girder Bridge, Steel Structures Committee
  8. Mariani, N., Mozer, J.D., Dyme, C.L., and Culver, C.G. (1973). Transverse stiffener requirements for curved webs, ASCE J. Struct. Div., 99(4), pp. 757-771
  9. Mijuskovic, O., Coric, B., and Pavlovic, M.N. (1999) Transversestiffener requirements for the post-buckling behavior of a plate in shear. Thin-Walled Structures, No. 34, pp.43-63 https://doi.org/10.1016/S0263-8231(98)00051-2
  10. Lee, Sung C, Davidson, J., and Yoo, C.H. (1996) Shear buckling coefficients of plate girder web panels. Computers and Structures, Elsevier Science, Vol. 59, No. 5, 789-795
  11. Lee, S.C. and Yoo, C.H. (1998) Strength of plate girder web panels under pure shear. Journal of Structural Engineering, ASCE, Vol. 124, No. 2, 184-194 https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(184)
  12. Sung, C. Lee, and Chai H. Yoo. (1999) Strength of curved i-girder web panels under pure shear, ASCE, J. Structural Engineering, Vol. 25, No. 8, pp.847-853
  13. Sung C. Lee, Chai H. Yoo, and Dong Y. Yoon. (2002) Behavior of intermediate transverse stiffeners attached on web panels, ASCE, J. Structural Engineering, Vol. 128, No. 3, pp.337-345 https://doi.org/10.1061/(ASCE)0733-9445(2002)128:3(337)
  14. Sung, C. Lee, Chai, H. Yoo, and Dong, Y. Yoon. (2003) New design rule for intermediate transverse stiffeners attached on web panels, ASCE, J. Structural Engineering, Vol. 129, No. 12, pp.1607-1614 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:12(1607)
  15. Yoo, C.H. and Lee, S.C. (2006) Mechanics of web panel postbuckling behavior in shear. ASCE, J. Structural Engineering, Accepted for Publication