KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study on Ultimate Shear Strength of Horizontally Curved Plate Girder Web Panels

강곡선 플레이트거더 복부판의 극한전단강도에 관한 실험연구

  • 이두성 (동국대학교 산업기술연구원) ;
  • 박찬식 (동국대학교 토목환경공학과) ;
  • 이성철 (동국대학교 토목환경공학과)
  • Received : 2006.02.28
  • Accepted : 2006.04.27
  • Published : 2006.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Although a limited number of experimental investigations and finite element analyses revealed that a curved web panel in practical design has a considerable reserve strength after the elastic buckling as a straight girder web panel, the current Guide Specifications for Horizontally Curved Steel Girder Highway Bridges (AASHTO, 2003) do not consider the postbuckling strength in the ultimate shear strength due to lack of a comprehensive study. In this study, the ultimate shear strength behavior of horizontally curved steel web panels was investigated through nonlinear finite element analysis and experimental test. It was found that curved web panels used in practical designs are able to develop the postbuckling strength that is equivalent to that of straight girder web panels having the same dimensional and material properties.

강곡선복부판의 전단설계에서 Guide Specifications(AASHTO, 2003)에서는 여전히 후좌굴강도를 반영하고 있지 않다. 그러나 최근 강곡선 복부판의 전단거동에 관한 해석 및 실험연구를 통해서 탄성좌굴 후에 직선교 복부판과 같이 후좌굴강도를 발현하고 있으며, 일반적인 설계범위에서 직선교 복부판과 유사한 크기의 극한전단강도를 나타내고 있는 것으로 조사되었다. 본 연구에서는 강곡선복부판의 극한전단강도를 조사하기 위하여 유한요소해석과 실험연구를 수행하였다. 연구결과를 통해서 일반적으로 설계가 수행되는 기하학적인 범위 내에서 강곡선복부판은 후좌굴강도를 발현하며, 그 크기는 동일한 재료를 적용한 직선복부판과 유사하다는 것을 알 수 있었다. 그러므로 강도한계상태에서 강곡선복부판도 Lee and Yoo(1998)가 제안한 직선복부판의 극한전단강도를 이용하여 설계할 수 있음을 본 연구를 통해서 제안하였다.

Keywords

References

  1. 이두성(2004) 휨과 전단의 상호작용을 고려한 강곡선 플레이트거더 복부판의 극한거동. 공학박사학위논문 동국대학교
  2. 이성철, 이두성, 박찬식(2004) 강곡선거더교 복부판의 전단강도에 관한 연구. 2004 대한토목학회 학술발표회 구두논문집
  3. 한국도로교통협회(2005) 도로교 설계기준
  4. AASHTO (2002) Standard Specifications for Highway Bridges, 17th ed. American Association of State Highway and Transportation Officials, Washington DC
  5. AASHTO (2003) AASHTO Guide Specifications for Horizontally Curved Steel Girder Highway Bridges, American Association of State Highway and Transportation Officials, Washington DC
  6. AASHTO (2004) LRFD Bridge Design Specifications for Highway Bridges, 3rd ed. American Association of State Highway and Transportation Officials, Washington DC
  7. Basler, K. (1963) Strength of plate girders in shear. Journal of Structure Division, ASCE, 87(ST7), pp. 151-180
  8. Batdorf, S. B., Stein, M., and Schildcrout, M. (1947) Critical shear stress of curved rectangular plates. NACA TN No.1342, National Advisory Committee for Aeronautics, Washington, D.C.
  9. Culver, C.G. and Dyme, L.D. (1972) Elastic buckling of stiffened plates. J. Struc. Divis., ASCE, Vol. 98, No. ST11, pp. 2641-2645
  10. Culver, C.G., Dyme, L.D., and Uddin, T. (1973) Web slenderness requirements for curved girders. J. Struct. Div., ASCE, 99(3), pp.417-430
  11. Galambos, T. V. (1998) Guide to Stability Design Criteria for Metal Structures, 5th Ed., Structure Stability Research Council, McGraw-Hill, New York, NY
  12. Mariani, N., Mozer, J.D., Dyme, C.L., and Culver, C.G. (1973) Transverse stiffener requirements for curved webs. J. Struct. Div., ASCE. 99(4), pp. 757-771
  13. Mozer, J., Cook, J., and Culver, C.G. (1975a) Horizontally curved highway bridges, stability of curved plate girders-Part 3. Contract No. FH-11-7389, Federal Highway Administration, Washington, D.C., 1-111
  14. Mozer, J., Ohlson, R., and Culver, C.G. (1971) Horizontally curved highway bridges -stability of curved plate girders. Rep. No. P2, Res. Proj. PR-2(111), Carnegie-Mellon University, Pittsburgh
  15. Mozer, J., Ohlson, R., and Culver, C.G. (1975b) Horizontally curved highway bridges, stability of curved plate girders-Part 2. Contract No. FH-11-7389, Federal Highway Administration, Washington, D.C., 1-121
  16. Nakai, H., Kitada, T., and Ohminami, R. (1984a) Experimental study on ultimate strength of web panels in horizontally curved girder bridges subjected to bending, shear, and their combinations. Proc. SSRC 1984, Annu. Tech. Session and Meeting, Structural Stability Research Council, San Francisco, 91-101
  17. Nakai, H., Kitada, T., Ohminami, R. and Fukumoto, K. (1984b) Experimental study on shear strength of horizontally curved plate girders. Proc. Japanese Soc. Of Civ. Engrs., Tokyo, 281-290 (in Japanese)
  18. Phoawanich, N., Park, J.Y., White, D.W., and Zureick, A.H. (2002) Shear Strength of Horizotally Curved Steel I-Girders Experimental Tests. Project Report, Curved Steel Bridge Research Project, FHWA
  19. Shanmugam, N.E., Mahendrakumar, M. and Thevendran, V. (2003) Ultimate load behavior of horizontally curved plate girders. Journal of Constructional Steel Research, Elsevier Science, Vol. 59, pp. 509-529 https://doi.org/10.1016/S0143-974X(02)00043-3
  20. Stein, M., and Yeager, D.J. (1949) Critical shear stress of curved rectangular panel with a central stiffener. NACA TN No.1972, National Advisory Committee for Aeronautics, Washington, D.C.
  21. Sung, C. Lee, and Chai H. Yoo (1998) Strength of Plate Girder Web Panels under Pure Shear. Journal of Structural Engineering, ASCE, Vol. 124, No. 2
  22. Sung. C. Lee and Chai H. Yoo (1999a) Experimental Study on Ultimate Shear Strength of Web Panels. J. Structual Engineering, ASCE, Vol. 125, No. 8, pp. 838-846 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:8(838)
  23. Sung. C. Lee and Chai H. Yoo (1999b) Strength of Curved I-Girder Web panels under Pure Shear. ASCE, J. Structual Engineering, Vol. 125, No. 8, pp.847-853 https://doi.org/10.1061/(ASCE)0733-9445(1999)125:8(847)
  24. Yoo, C.H. (1996) Progress report on FHWA-CSBRP-Task D. FHWA Contract No. DTFH61-92-C-0036, Auburn University. Department of Civil Engineering Interim Report submitted to HDR Engineering, Inc., Pittsburgh Office, Pittsburgh, Pa.