Abstract
To investigate the stabilizing effect of anchors against sliding, a series of the model test was carried out. An apparatus was developed to perform the model test of the slope reinforced by anchors. An instrumentation system has been applied on the anchors to measure the axial force during slope failure. The maximum stabilizing effect is revealed about 0.5% of the area ratio. The initial loss of anchor force is represented about 24% of initial jacking force. This result is equaled to the proposed range(10%~25%) of the field test result(Yun, 1997). The effective jacking force corresponds to 70% of the initial jacking force. Therefore, the initial jacking force should be determined more than 30% of the design jacking force. As the initial jacking force becomes increase, the reinforced slope is transferred to brittle failure behavior due to increasing the density of slope soils.
앵커의 활동억지효과를 조사하기 위하여 일련의 모형실험을 수행하였다. 이를 위하여 앵커가 설치된 사면에 대한 모형실험 장치를 고안하였다. 그리고 모형실험시 각종 계측시스템을 이용하여 사면활동에 따른 앵커의 축력변화를 조사하였다. 모형실험결과 앵커의 면적비를 0.5%로 설치할 경우 네일의 사면활동에 대한 억지효과가 가장 크게 발휘된다. 앵커축력의 초기손실율은 초기인장력의 약 24%로 나타났다. 이는 기존의 현장실험결과(윤중만, 1997)에서 제안된 10%~25%의 범위와 일치함을 알 수 있다. 그리고 앵커의 유효인장력은 초기인장력의 70%에 해당하므로, 앵커의 초기인장력은 설계인장력보다 30%정도 증가하여 설계하여야 할 것이다. 한편, 앵커의 초기인장력이 증가하게 되면 사면지반의 상대밀도가 증가되어 사면은 취성파괴의 거동을 보임을 알 수 있다.