초록
본 연구는 일체형과 분절형 거더의 거동차이 최소화 및 PSI(Precast PSC-Segmental I Grider)거더의 역학적 거동 특성을 실험적으로 검증하기 위하여 실물 크기의 거더를 일체형(CG)실험체 1본, 분절형(SGT1, SGT2, SGT3)실험체 3본을 제작하여 실험을 수행하였다. 일체형(CG)실험체는 단 경간으로 25 m의 길이로 제작하였고, 분절형 실험체는 각 세그멘트를 5 m 길이로 제작하고 1차 긴장력을 도입하여 하나의 거더로 일체화 시킨 후, 슬래브를 타설한 다음 2차 긴장력을 도입하는 방법으로 제작하였다. 실험결과 모멘트는 실험값과 이론값의 오차가 매우 작거나 실험값이 이론값에 비해 약간 더 큰 것으로 나타나 PSI거더의 이론이 신뢰성이 있는 것으로 나타났다.
This study was performed by using experiment to minimize behavior difference of Monolithic and segmental Girder and to prove the design concept of the PSI (Precast PSC-Segmental I Grider). A full scale girder test was performed in four different cases, the monolithic girder, the segmental girder type-1, the segmental girder type-2 and the segmental girder type-3. The monolithic girder that was produced in one body 25 m span and the segmental girder that was jointed 5-sliced 5 m segment. The girder was built by as one body prestressing the tendons after manufacturing the segmental girder, and second prestressing after the casting of the slab concrete. The test result shows that the measured values were almost same or slightly bigger than the theoretical values which means that the PSI girder bridges concept came out to be reliable.