References
- 김대영(2001) 절리면 거칠기에 따른 암석의 전단거동. 박사학위논문, 한양대학교
- 김무중(2000) 3차원 스캐너의 이해와 제품별 특징. CAD & Graphics. 제5호, pp. 169-175
- 배기윤, 이정인(2002) 레이저 변위계를 이용한 암석 절리면의 3차원 거칠기 측정기 개발. 터널과 지하공간, 한국암반공학회, Vol. 12, No. 4, pp. 268-276
- 류현미, 김석성, 홍석경, 연규황(2002) 위상이동 간섭무늬 투영을 이용한 3차원 형상측정 시스템의 위상계산오차 해석. 한국광학회지, 한국광학회, Vol. 13, No. 3, pp. 182-188
- 이상돈(1996) 절리면의 거칠기에 따른 암석의 전단강도 및 변형 특성에 관하여. 석사학위논문, 서울대학교
- 이인모, 홍은수, 배석일, 이석원(2002) 암석 절리면 거칠기의 정량화에 따른 절리면 전단강도 모델. 한국지반공학회논문집, 한국지반공학회, Vol. 18, No. 4, pp. 229-238
- 이희석(1999) 주기전단 하중하의 암석절리의 역학적 및 수리학적 거동 연구. 박사학위논문, 서울대학교
- 홍은수(2005) 거칠기의 발현 특성에 의한 암석 절리 거칠기의 특성화. 박사학위논문, 고려대학교
- Barton, N.R. and Choubey, V. (1977) The shear strength of rock joints in theory and practice. Rock Mechanics. Vol. 10, pp. 1-54 https://doi.org/10.1007/BF01261801
- Belem, T., Homand-Etienne, F., and Souley, M. (2000) Quantitative Parameters for Rock Joint Surface Roughness. Rock Mech. and Rock Engng. Vol. 33, No. 4, pp. 217-242 https://doi.org/10.1007/s006030070001
- Bhushan, B. (2002) Introduction to tribology. John Wiley & Sons Inc., New York, N.Y.
- Brown, S.R. and Scholz, C.H. (1985) Broad bandwidth study of the topography of natural rock surfaces. J. Geophys. Res., Vol. 90, No. B14, pp. 125754-125782
- Borri-Brunetto, M., Carpinteri, A., and Chiaia, B. (1999) Scaling phenomena due to fractal contact in concrete and rock fractures. Int. J. of Fracture, Vol. 95, pp. 221-238 https://doi.org/10.1023/A:1018656403170
- Carr, J.R. and Warriner, J.B. (1989) Relationship between the fractal dimension and joint roughness coefficient. Bull. Assoc. Engrg. Geol., Vol. 26, pp. 253-264
- Chae, B.G., Ichikawa, Y., Jeong, G.C., Seo, Y.S., and Kim, B.C. (2004) Roughness measurement of rock discontinuities using a confocal laser scanning microscope and the fourier spectral analysis. Engineering Geology, Vol. 72, pp. 181-199 https://doi.org/10.1016/j.enggeo.2003.08.002
- Dove, J.E. and Frost, J.D. (1996) A method for measuring geomembrane surface roughness. Geosynthetics International, Vol. 3, pp. 369-392 https://doi.org/10.1680/gein.3.0067
- El Sodani, S.M. (1978) Profilometric analysis of fractures. Metallography, Vol. 11, pp. 246-336
- Fardin, N., Stephansson, O., and Jing, L. (2001) The scale dependence of rock joint surface roughness. Int. J. Rock Mech. Min. Sci., Vol. 38, pp. 659-669 https://doi.org/10.1016/S1365-1609(01)00028-4
- Feng, Q., Fardin, N., Jing, L., and Stephansson, O. (2003) A new method for in-situ non-contact roughness measurement of large rock fracture surfaces. Rock Mech. and Rock Engng., Vol. 36, No. 1, pp. 3-25 https://doi.org/10.1007/s00603-002-0033-1
- Gadelmawla, E.S., Koura, M.M., Maksoud, T.M.A., Elewa, I.M., and Soliman, H.H. (2002) Roughness parameters. J. Materials Processing Tech., Vol. 123, pp. 133-145 https://doi.org/10.1016/S0924-0136(02)00060-2
- Gokhale, A.M. and Drury, W.J. (1990) A general method for estimation of fracture surface roughness: part II. theoretical aspects. Metallurgical Transactions A, Vol. 21A, pp. 1193-1199
- Gokhale, A.M. and Underwood, E.E. (1990) A general method for estimation of fracture surface roughness: part I. practical considerations. Metallurgical Transactions A, Vol. 21A, pp. 1201-1207
- Grasselli, G. and Egger, P. (2003) Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters. Int. J. of Rock Mech. Min. Sci., Vol. 40, pp. 25-40 https://doi.org/10.1016/S1365-1609(02)00101-6
- Haberfield, C.M. and Johnston, I.W. (1994) A mechanically-based model for rough rock joints. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 31, No. 4, pp. 279-292 https://doi.org/10.1016/0148-9062(94)90898-2
- Haberfield, C.M. and Seidel, J.P. (1999) Some recent advances in the modelling of soft rock joints in direct shear. Ceotechnical and Geological Engineering, Vol. 17, pp. 177-195 https://doi.org/10.1023/A:1008900905076
- Homand, F., Belem, T., and Souley, M. (2001) Friction and degradation of rock joint surfaces under shear loads. Int. J. Numer. Anal. Meth. Geomech., Vol. 25, pp. 973-999 https://doi.org/10.1002/nag.163
- Hsiung, S.M., Ghosh, A., Ahola, M.P., and Chowdhury, A.H. (1993) Assessment of conventional methodologies for joint roughness coefficient determination. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 30, No. 7, pp. 825-829 https://doi.org/10.1016/0148-9062(93)90030-H
- Huang, S.L., Oelfke, S.M., and Speck, R.C. (1992) Applicability of fractal characterization and modelling to rock joint profiles. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 29, pp. 89-98 https://doi.org/10.1016/0148-9062(92)92120-2
- Kishida, K., Adachi, T., and Tsuno, K. (2001) Modeling of the shear behavior of rock joints under constant normal confining conditions. Rock Mech. in the National Interest, Elsworth, Tinucci and Heasley, eds, pp. 791-798
- Kulatilake, P.H.S.W., Shou, G., and Huang, T.H. (1995) Spectral-based peak-shear-strength criterion for rock joints. J. Geotech. Engrg., ASCE, pp. 789-796
- Kulatilake, P.H.S.W. and Um, J. (1999) Requirements for accurate quantification of self-affine roughness using the roughnesslength method. Int. J. Rock Mech. Min. Sci., Vol. 36, pp. 5-18 https://doi.org/10.1016/S0148-9062(98)00170-3
- Lanaro, F. (2000) A random field model for surface roughness and aperture of rock fractures. Int. J. Rock Mech. Min. Sci., Vol. 37, pp. 1195-1210 https://doi.org/10.1016/S1365-1609(00)00052-6
- Lange, D.A., Jannings, H.M., and Shah, S.P. (1993) Relationship between fracture surface riughness and fracture behaviour of cement paste and mortar. J. Am. Ceram. Soc., Vol. 3, pp. 587-597
- Lee, H.S. and Ahn, K.W. (2004) A prototype of digital photogrammetric algorithm for estimating roughness of rock surface. Geosciences Journal, Vol. 8, No. 3, pp. 333-341 https://doi.org/10.1007/BF02910253
- Lee, S.G. and De Freitas, M.H. (1988) Quantitative definition of highly weathered granite using the slake durability test. Geotechnique, Vol. 38, No. 4, pp. 635-640 https://doi.org/10.1680/geot.1988.38.4.635
- Lee, S.W. (1998) Influence of surface topography on interface strength and counterface soil structure, PhD Thesis, Georgia Institute of Technology, Atlanta, Georgia
- Lee, Y.H., Carr, J.R., Barr, D.J., and Hass, C.J. (1990) The fractal dimension as a measure of the roughness of rock discontinuity profile. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 27, pp. 453-464 https://doi.org/10.1016/0148-9062(90)90998-H
- Lopez, P., Riss, J., and Archambault, G. (2003) An experimental method to link morphological properties of rock fracture surfaces to their mechanical properties. Int. J. Rock Mech. Min. Sci., Vol. 40, pp. 947-954 https://doi.org/10.1016/S1365-1609(03)00052-2
- Maerz, N.H., Franklin, J.A. (1990) Roughness scale effect and fractal dimension. Proc. 1st Int. Workshop on Scale Effects in Rock Masses, Leon, pp. 121-125
- Maerz, N.H., Franklin, J.A., and Bennett, C.P. (1990) Joint roughness measurement using shadow profilometry. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 27, pp. 329-343 https://doi.org/10.1016/0148-9062(90)92708-M
- Miller, S.M., Mcwilliams, P.C., and Kerkering, J.C. (1990) Ambiguities in estimating fractal dimensions of rock fracture surfaces. Proc. Rock Mech. Contribution and Challenges, Hustruid and Johnson, eds, pp. 471-478
- Plesha, M.E. (1987) Constitutive models for rock discontinuties with dilatancy and surface degradation. Int. J. for Num. and Analytical Methods in Geomechanics, Vol. 11, pp. 345-362 https://doi.org/10.1002/nag.1610110404
- Reeves, M.J. (1985) Rock surface roughness and frictional strength. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 22, No. 6, pp. 429-442 https://doi.org/10.1016/0148-9062(85)90007-5
- Reich, C., Ritter, R., and Thesing, J. (2000) 3-D shape measurement of complex objects by combining photogrammetry and fringe projection. Opt. Eng., Vol. 39, No. 1, pp. 224-231 https://doi.org/10.1117/1.602356
- Santamarina, J.C. and Fratta, D. (1998) Introduction to Discrete Signals and Inverse Problems in Civil Engineering. ASCE press, Virginia
- Schreiber, W. and Notni, G. (2000) Theory and arrangements of self-calibrating whole-body three-dimensional measurement systems using fringe projection technique. Opt. Eng., Vol. 39, No. 1, pp. 159-169 https://doi.org/10.1117/1.602347
- Swan, G. (1983) Determination of stiffness and other joint properties from roughness measurements. Rock Mech. Rock Engrg., Vol. 16, pp. 19-38 https://doi.org/10.1007/BF01030216
- Swan, G. and Zongqi, S. (1985) Prediction of shear behaviour of joints using profiles. Rock Mech. and Rock Engrg., Vol. 18, pp. 183-212 https://doi.org/10.1007/BF01112506
- Tse, R. and Cruden, D.M. (1979) Estimating joint roughness coefficients. Int. J. Rock Mech. Min. Sci. Geomech. Abstr., Vol. 16, pp. 303-307 https://doi.org/10.1016/0148-9062(79)90241-9
- Turk, N., Gerd, M.J., Dearman, W.R., and Admin, F.F. (1987) Characterization of rock joint surfaces by fractal dimension. Proc. 28th U.S. Symp. Rock Mech., pp. 1223-1236
- Wakabayashi, N. and Fukushige, I. (1995) Experimental study on the relation between fractal dimension and shear strength. Fractured and jointed rock masses, Rotterdam, pp. 119-124
- Xie, H., Wang, J., and Xie, W. (1997) Fractal effects of surface roughness on the mechanical behavior of rock joints. Chaos, Solitons & Fractals, Vol. 8, No. 2, pp. 221-252 https://doi.org/10.1016/S0960-0779(96)00050-1
- Yang, Z.Y., Di, C.C., and Yen, K.C. (2001) The effect of asperity order on the roughness of rock joints. Int. J. Rock Mech. Min. Sci., Vol. 38, pp. 745-752 https://doi.org/10.1016/S1365-1609(01)00032-6
- Yu, X. and Vayssade, B. (1991) Joint profiles and their roughness parameters. Int. J. Rock Mech. Min. Sci., Vol. 28, pp. 333-336 https://doi.org/10.1016/0148-9062(91)90598-G