초록
우리나라 하천 제방은 유래를 알 수없는 오래 된 것이 많고 당시 공학적 배경 없이 주변에서 손쉽게 얻을 수 있는 재료를 사용하여 제방을 축조하였기 때문에 근본적으로 많은 문제점을 내포하고 있다. 현재에 와서는 제체가 노후화 되고 최근 기상이변으로 인해 제방의 안전이 더욱 크게 위협받으면서 제방단면을 증대시키거나 수리시설을 전폭 재검토하는 등 설계 보완적 측면의 여러 가지 대책방안이 수립되고 있다. 그러나 제방을 신설하거나 기존단면을 보수 또는 단면을 증대함에 있어 재료특성을 제대로 반영하지 못하고 아직도 단편적인 설계기준을 전면 적용하거나 획일적인 다짐 시공관리 기준을 적용하는 정도로 그치는 경우도 있다. 따라서 본 검토에서는 제체의 재료특성에 주안점을 두어 Sherard(1953)가 제안한 균열 및 파이핑 저항등급을 소개, 이를 실제 파이핑이 발생한 국내 하천제방에 적용한 결과를 제시하고 유한요소법에 의한 침투해석을 실시하여 현행 설계기준에 의한 안정검토 결과와 비교해 보았다. 검토결과, 두 방법 모두 파이핑이 발생하는 것으로 평가되었으나 파이핑 저항등급은 다짐의 영향이 고려되어야 하고, 입도기준의 경우 주어진 재료의 입도와 제안된 입도기준과의 일치도를 정량적으로 제시하기 어려운 문제점을 보여 이에 대한 보완이 필요할 것으로 판단되었다.
Lots of river embankments or levees in Korea are quite so old and unknown the origin even. The river deposits, moreover, obtainable easily somewhere were used for materials of embankment without any technical considerations such as the influence soil properties and construction methods on embankment stability. It's natural that safety would be threatened if the water level rises due to flood or rainfall when it comes to abnormal weather conditions, especially. From this point of view, enlargement of embankment, irrigation works, etc. are in progress recently at the situation from a reinforcement work. However, taking influence of soil properties and construction methods on embankment stability into account against cracking or piping is still insufficient. Fragmentary design criteria or irrational construction methods are applied rather as the case may be. In this study, therefore, a way to estimate piping and cracking resistance (Sherard, 1953) has been introduced and reevaluated for practical use with an eye to material properties and its applicability to piping-experienced embankments was examined. Piping possibility was also examined in the present design criteria and compared. In view of the results achieved, it reflects that both yield piping possibility. But it's still necessary to complement how to judge and verify piping resistance of given soils with gradation curves by the representative curve, quantitatively and that piping resistance should consider compaction effects as well.