References
- Acosta Costa, F.J. (1999) Experimental Characterization of the Mechanical and Structural Properties of Fiber Reinforced Polymeric Bridge Deck Components, Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA, USA
- ASTM D 792-00 (2000) Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement, American Society for Testing and Materials, West Conshohocken, USA
- ASTM D 341O/D 3410M-93 (1995) Standard Test Method for Compressive Properties of Polymer Matrix Composite Material with Unsupported Gage Section by Shear Loading, American Society jar Testing and Materials, West Conshohocken, USA
- ASTM D 5379/0 5379M-93 (1993) Standard test methods for shear properties of composite materials by v-notched beam method, American Society jar Testing and Materials, West Conshohocken, USA
- Bakis, C.E., Bank, L.C., Brown, V.L., Cosenza, E., Davalos, J.F., Lesko, J.J., Machida, A., Rizkalla, S.H., and Triantafillou, T.C. (2002) Fiber-reinforced polymer composites for construction-state-of-the-art review, Journal of Composites for Construction, Vol. 6, No.2, pp. 73-87 https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(73)
- Barbero, E.J. (1999) Introduction to Composite Material Design, Taylor and Francis
- Barbero, E.J. and Tomblin, J. (1993) Euler buckling of thin-walled composite columns, Thin-Walled Structures, Vol. 17, No.4, pp. 237-258 https://doi.org/10.1016/0263-8231(93)90005-U
- Barbero, E.J. and Trovillion, J. (1998) Prediction and measurement of the post-critical behavior of fiber-reinforced composite columns, Composites Science and Technology, Vol. 58, pp. 1335-1341 https://doi.org/10.1016/S0266-3538(98)00006-2
- Davalos, J.F. and Qiao, P. (1997) Analytical and Experimental Study of Lateral and Distortional Buckling of FRP Wide-Flange Beams, Journal of Composites for Construction, Vol. 1, No.4, pp. 150-159 https://doi.org/10.1061/(ASCE)1090-0268(1997)1:4(150)
- Hewson, P. (1978) Buckling of pultruded glass fiber-reinforced channel sections, Composites, Vol. 9, No.1, pp. 56-60 https://doi.org/10.1016/0010-4361(78)90520-7
- Hoff, N.J., Boley, B.A., and Coan, J.M. (1948) The development of a technique for testing stiff panel in edgewise compression, Proceedings of the Society for Experimental Stress Analysis, Vol. 5, No.2, pp.14-24
- Jung, S.N., Nagaraj, V,T., and Chopra, I. (1999) Assessment of composite rotor blade modeling techniques, Journal of the American Helicopter Society, Vol. 44, No.3, pp.188-205
- McManus, P.F. and Culver, C.G. (1969) Nonuniform torsion of composite beams, Journal of the Structural Division, ASCE, Vol. 95, No. ST6, pp. 1233-1256
- Park, J.Y. (2001) Pultruded Composite Materials under Shear Loading, Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA, USA
- Razzaq, Z., Prabhakaran, R., and Sirjani, M.M. (1996) Load and Resistance Factor Design (LRFD) Approach for Reinforced-Plastic Channel Beam Buckling, Composites: Part B, Vol. 27B, No. 3-4, pp. 361-369
- Stoddard, W.P. (1997) Lateral-Torsional Buckling Behavior of Polymer Composite I-Shaped Member, Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA, USA
- Southwell, R.V. (1932) On the analysis of experimental observations in problems of elastic stability, Proceedings of the Royal Society of London: Series A, Vol. 135, pp. 601-616
- Volovoi, V.V., Hodges, D.H., Cesnik, C.E.S., and Popescu, B. (2001) Assessment of beam modeling methods for rotor blade applications, Mathematical and Computer Modelling, Vol. 33, Issue 10-11, pp. 1099-1112
- Wang, Y. and Zureick, A. (1994) Characterization of the longitudinal tensile behavior of pultruded i-shape structural members using coupon specimens, Composite Structures, Vol. 29, pp. 463-472 https://doi.org/10.1016/0263-8223(94)90115-5
- Ye, B.S., Svenson, A.L., and Bank,.L.C. (1995) Mass and volume fraction properties of pultruded glass fiber-reinforced composites, Composites, Vol. 26, No. 10, pp. 725-731 https://doi.org/10.1016/0010-4361(95)91140-Z
- Zureick, A. and Scott, D. (1997) Short-term behavior and design of fiber-reinforced polymeric slender members under axial compression, Journal of Composites for Construction, Vol. 1, No. 4, pp. 140-149 https://doi.org/10.1061/(ASCE)1090-0268(1997)1:4(140)
- Zureick, A. and Steffen, R. (2000) Behavior and design of concentrically loaded pultruded angle struts, Journal of Structural Engineering, Vol. 126, No.3, pp. 406-416 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:3(406)