Journal of Magnetics

  • 제11권3호
  • /
  • Pages.135-138
  • /
  • 2006
  • /
  • 1226-1750(pISSN)
  • /
  • 2233-6656(eISSN)
한국자기학회 (The Korean Magnetics Society)
권호 표지
DOI QR코드

DOI QR Code

Fabrication of Nano-Structures on NiFe Film by Anodization with Atomic Force Microscope

  • Okada, T. (Department of Electrical and Electronic Engineering, Toyohashi University of Technology) ;
  • Uchida, H. (Department of Electrical and Electronic Engineering, Toyohashi University of Technology) ;
  • Inoue, M. (Department of Electrical and Electronic Engineering, Toyohashi University of Technology)
  • 발행 : 2006.09.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

We studied local anodization on permalloy $(Ni_{80}Fe_{20})$ thin film with an atomic force microscope (AFM), which was performed by applying a voltage between the permalloy sample and conductive AFM tip. Comparing with anodization on Si (100) substrate, nano-structures on the permalloy thin film was fabricated with low processability.In order to improve the processability on the permalloy thin film, we used dot-fabrication method, thatis, a conductive AFM probe was kept at a position on the film during the anodization process.

키워드

참고문헌

  1. J. A. Dagata, J. Schneir, H. H. Harary, C. J. Evans, M. T. Postek, and J. Bennett, Appl. Phys. Lett. 56, 2001 (1990) https://doi.org/10.1063/1.102999
  2. E. S. Snow and P. M. Campbell, Appl. Phys. Lett. 64, 1932 (1994) https://doi.org/10.1063/1.111746
  3. R. Ohashi, T. Ohtsuka, N. Ohta, A. Yamada and M. Konagai, Thin Solid Films 464-465, 237 (2004) https://doi.org/10.1016/j.tsf.2004.06.103
  4. Z. J. Davis, G. Abadal, O. Hansen, X. Borise, N. Barniol, F. Perez-Murano and A. Boisen, Ultramicroscopy 97, 467 (2003) https://doi.org/10.1016/S0304-3991(03)00075-5
  5. R. Held, T. Heinzel, P. Studerus and K. Ensslin, Physica E, 2, 748 (1998) https://doi.org/10.1016/S1386-9477(98)00153-2
  6. Xiaodong Hu and Xiaotang Hu, Ultramicroscopy 105, 57 (2005) https://doi.org/10.1016/j.ultramic.2005.06.018
  7. Y. Takemura and J. Shirakashi, Advanced Engineering Materials, No.3, 170 (2005)