Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

On the Ultimate Longitudinal Strength Assessment of Ships' Hull Structure

선체 선각구조의 최종 종강도 평가에 관한 연구

  • Lee, Hun-Gon (Hull Initial Design Dept., Shipbuilding Div., Hyundai Heavy Industries) ;
  • Lee, Joo-Sung (School of Naval Architecture and Ocean Engineering, Univ. of Ulsan)
  • 이훈곤 (현대중공업(주) 조선사업부 구조설계부) ;
  • 이주성 (울산대학교 조선해양공학부)
  • Published : 2006.06.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is concerned with a practical guide for the ultimate longitudinal strength assessments of ships' hull structure. Rigorous non-linear structural analysis for three tanker models has been carried out to examine the ultimate strength behavior. Formula of estimating the ultimate longitudinal strength has been proposed which is modified with the results of non-linear finite element analysis of hull girders. Computational reliability and accuracy of the large-scale non-linear finite element analysis and the proposed simplified formula are verified through comparing their results with that of 1/3 scale frigate model test and DNVs program. Additionally, the ultimate longitudinal strength for ten tanker models is compared with those by the method specified in the 2nd Draft of common structural rule for tankers, which is being developed by IACS.

Keywords

References

  1. Dow, R.S., 1991, ' Testing and Analysis of a 1/3-Scale Welded Steel Frigate Model,' Proc. IntI. Conf. on Advances in Marine Structures, Dunfermline Scotland, pp. 749-773
  2. Faulkner, D. and Sadden, J.A., 1979, ' Toward a Unified Approach to Ship Structural Safety,' RINA Transactions, 120, pp. 1-28
  3. lACS Team for Joint Tanker Project, 2005, Common Structural Rules for Double Hull Oil Tankers - 2nd Draft
  4. Lee, J.S., 1989, Reliability analysis .of continuous structural systems, PhD. Thesis. University of Glasgow, pp. 103-183
  5. Masahiko Fujikubo, 2005, ' Progressive Collapse Analysis of Ship' s Hull Girder in Longitudinal Bending using Idealized Structural unit Method,' Journal of the Japan Society of Naval Architects and Ocean Engineers, Vol.1 , pp. 187-196
  6. Smith, C.S., Davidson, P.C.m Chapman, J.C. and Dowling, P.J., 1988, ' Strength and Stiffness of Ship' s Plating under In-Plane Compre?sion and Tension,' RINA Transactions , 130, pp. 277-296