다양한 형상을 갖는 액화가스 기화기의 기화특성에 관한 실험적 연구

Experimental Study on the Gasification Characteristics of Liquefied Gas Vaporizer with Various Shape

  • 이용훈 (경상대학교 대학원) ;
  • 이상철 (경상대학교 대학원) ;
  • 정효민 (경상대학교 기계항공공학부, 해양산업연구소) ;
  • 정한식 (경상대학교 기계항공공학부, 해양산업연구소)
  • Lee Yong-Hun (Graduate School, Department of Mechanical and Precision Engineering, Gyeongsang National University) ;
  • Lee Sang-Chul (Graduate School, Department of Mechanical and Precision Engineering, Gyeongsang National University) ;
  • Jeong Hyo-Min (School of Mechanical and Aerospace Engineering, The Institute of Marine Industry, Gyeongsang National University) ;
  • Chung Han-Shik (School of Mechanical and Aerospace Engineering, The Institute of Marine Industry, Gyeongsang National University)
  • 발행 : 2006.06.01

초록

This paper was studied for optimum design of the used vaporizer at a satellite station. Generally, the cold air is created by temperature drop on the vaporizer surface. In addition, the frost creates ice deposit layer, therefore, heat transfer on vaporizer decreases into the adiabatic condition. By this reason, recent vaporizer system is installed as parallel type, and it takes three times of vaporizer capacity. But this vaporizer system requires much installation costs and restricted by some space. It is very important to solve this problem. This study paper is regarding $LN_2$ vaporizer where the utilization increases recently. There are three variable conditions which are used in this study research. First, fin lengths of 4000mm, 6000mm, 8000mm and 0, 4, 8 fin types were applied rut each vaporizer. Second, we applied four season condition which consist of humidity, temperature and air velocity to the experimental environment. Finally, pressure was applied to get flow rate during experiment. This paper objective is to propose vaporizer type and length data for best performance of vaporizer through experiment.

키워드