폴리비닐 계열 유기절연막 형성과 특성평가

Formation and Characterization of Polyvinyl Series Organic Insulating Layers

  • 장지근 (단국대학교 전자공학과) ;
  • 정진철 (백석문화대학 컴퓨터정보학부) ;
  • 신세진 (백석문화대학 컴퓨터정보학부) ;
  • 김희원 (백석문화대학 컴퓨터정보학부) ;
  • 강의정 (백석문화대학 컴퓨터정보학부) ;
  • 안종명 (백석문화대학 컴퓨터정보학부) ;
  • 서동균 (백석문화대학 컴퓨터정보학부) ;
  • 임용규 (백석문화대학 컴퓨터정보학부) ;
  • 김민영 (백석문화대학 컴퓨터정보학부)
  • Jang Ji-Geun (Department of Electronics Engineering, Dankook University) ;
  • Jeong Jin-Cheol (Division of Computer Information, Baekseok college) ;
  • Shin Se-Jin (Division of Computer Information, Baekseok college) ;
  • Kim Hee-Won (Division of Computer Information, Baekseok college) ;
  • Kang Eui-Jung (Division of Computer Information, Baekseok college) ;
  • Ahn Jong-Myong (Division of Computer Information, Baekseok college) ;
  • Seo Dong-Gyun (Division of Computer Information, Baekseok college) ;
  • Lim Yong-Gyu (Division of Computer Information, Baekseok college) ;
  • Kim Min-Young (Division of Computer Information, Baekseok college)
  • 발행 : 2006.03.01

초록

The polyvinyl series organic films as gate insulators of thin film transistor(TFT) have been processed and characterized on the polyether sulphone (PES) substrates . The poly-4-vinyl phenol(PVP) and polyvinyl toluene (PVT) were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series; copolymer PVP(10 wt%), 5wt% cross-linked PVP(10 wt%), copolymer PVP(20 wt%), 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current of 1.2 pA at ${\pm}10V$. The ms value of surface roughness and the capcitance per unit area are 2.41 and $1.76nF/cm^2$ in the case of 10 wt% cross-linked PVP(20 wt%) layer, respectively.

키워드