A Study on the Improvement of Image Fusion Accuracy Using Smoothing Filter-based Replacement Method

SFR기법을 이용한 영상 융합의 정확도 향상에 관한 연구

  • 윤공현 (연세대학교 건설공학연구소)
  • Published : 2006.04.01

Abstract

Image fusion techniques are widely used to integrate a lower spatial resolution multispectral image with a higher spatial resolution panchromatic image. However, the existing techniques either cannot avoid distorting the image spectral properties or involve complicated and time-consuming decomposition and reconstruction processing in the case of wavelet transform-based fusion. In this study a simple spectral preserve fusion technique: the Smoothing Filter-based Replacement(SFR) is proposed based on a simplified solar radiation and land surface reflection model. By using a ratio between a higher resolution image and its low pass filtered (with a smoothing filter) image, spatial details can be injected to a co-registered lower resolution multispectral image minimizing its spectral properties and contrast. The technique can be applied to improve spatial resolution for either colour composites or individual bands. The fidelity to spectral property and the spatial quality of SFM are convincingly demonstrated by an image fusion experiment using IKONOS panchromatic and multispectral images. The visual evaluation and statistical analysis compared with other image fusion techniques confirmed that SFR is a better fusion technique for preserving spectral information.

영상융합은 저해상도 다중분광영상과 고해상도 전정영상을 통합시키는 기법으로서 현재 까지 널리 사용되고 있다 하지만, 기존의 사용되어온 방법은 융합과정시 적지않은 분광정보의 왜곡을 불러일으키거나 웨이블렛 기법과 같은 경우 주파수 분해 및 복원 과정이 필요하므로 처리시간이 길어지는 단점이 있다. 본 연구에서는 비교적 간단한 분광정보 보존 기법: 평활화 필터 기반 대체기법을 제안하였다. 이 기법은 단순화 시킨 태양 방사 및 지표면 반사 모델에 기반을 두고 있으며 저주파수 영역 필터링 영상과 전정영상의 해상도 비율을 이용하여 분광학적 특성의 왜곡을 최소화시키며 전정영상의 상세한 지형묘사를 그대로 유지 시킨다. 또한 이 방법은 RGB 의 컬러 합성 뿐만 아니라 단일밴드의 융합에도 적용 시킬 수 있다. 제안된 기법을 검증하기 위하여 IKONOS 전정영상과 다중분광영상을 이용하여 분광정보의 왜곡정도와 공간정보의 상세함에 대한 분석을 하였다. 시각적 검토 및 통계적 방법을 통해 기존의 융합기법과 비교한 결과 분광정보 보전의 측면에서 제안된 SFR 기반 융합기법이 더 나은 결과를 보여주었다.

Keywords