한국유체기계학회 논문집 (The KSFM Journal of Fluid Machinery)

한국유체기계학회 (Korean Society for Fluid machinery)
권호 표지
DOI QR코드

DOI QR Code

Segmental Wedge를 이용한 차압식 유량측정 방법

Flow rate Measurement Using Segmental Wedge as a Restriction Device for Differential Pressure

  • 윤준용 (한양대학교 기계공학과) ;
  • 성낙원 (한양대학교 대학원 기계공학과)
  • 발행 : 2006.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The discharge coefficient in segmental wedge haying ninety degrees yeller angle for the five kinds of opening ratio with differential pressure taps located at both upstream and downstream of one diameter of pipe was measured. Main purpose of this work is placed on specifying the characteristic of discharge coefficient of a segmental wedge used as a primary element of flow metering devices, and suggestion for the fixed location of pressure taps useful. Although the range of the opening ratio over this work is more expanded than previous studies. The opening ratios of segmental wedge, namely 0.3, 0.4, 0.5, 0.6 and 0.7 were investigated. The Reynolds number based on the spool inside diameter ranges from 12,000 to 380,000.

키워드

참고문헌

  1. R. W. Miller, 1996, 'Flow Measurement Engineering Handbook,' 3rd ed., McGrawHill Press
  2. ISO 5167-1, 1991, 'Measurement of Fluid Flow by Means of Orifice Plate, Nozzles and Venturi Tubes Inserted in Circular Cross Sectional Conduits Running Full,' International Organization of Standardization:
  3. ISO/TR 12767, 1998, 'Measurement of Fluid Flow by Means of Pressure-Differential Devices - Guidelines to the Effect of Departure from the Specifications and Operating Conditions given in ISO 5167-1,' International Organization of Standardization
  4. G. L. Morrison, D. Terracina, C. Brewer and K. R. Hall, 2001, 'Response of a Slotted Orifice Flow Meter to an Air/Water Mixture,' Flow Measurement and Instrumentation, Vol. 12, pp. 175-180 https://doi.org/10.1016/S0955-5986(01)00018-8
  5. H. S. Sondh, S. N. Singh, V. Seshadri and B. K. Gandhi, 2002, 'Design and Development of Variable Area Orifice Meter,' Flow Measurement and Instrumentation, Vol. 13, pp. 69-73 https://doi.org/10.1016/S0955-5986(02)00030-4
  6. A. T. J. Hayward, 1976, 'A Linear Orifice - plate Flowmeter,' Journal of Physics E : Scientific Instruments, Vol. 9, pp. 440-442 https://doi.org/10.1088/0022-3735/9/6/007
  7. S. N. Singh, B. K. Gandhi, V. Seshadri and V. S. Chauhan, 2004, 'Design of a Bluff Body for Development of Variable Area Orifice-meter,' Flow Measurement and Instrumentation, Vol. 15, pp. 97-103 https://doi.org/10.1016/j.flowmeasinst.2003.11.001
  8. Y. Oguri, 1987, 'Wedge Flowmeter,' JSME Part B, Vol. 53, pp. 3257-3261
  9. A. Buhidma and R. Pal, 1996, 'Flow Measurement of Two-phase Oil-inwater Emulsions using Wedge Meters and Segmental Orifice Meters,' Chemical Engineering Journal, Vol. 63, pp. 59-64 https://doi.org/10.1016/0923-0467(95)03076-X