Reliability Characteristics of Class-E Power Amplifier using Class-F Driving Circuit

Class-F 구동회로를 사용하는 Class-E 전력 증폭기의 신뢰성

  • 최진호 (부산외국어대학교 컴퓨터공학부)
  • Published : 2006.06.01

Abstract

A class-E CMOS RF(Radio frequency) power amplifier with a 1.8 Volt power supply is designed using $0.25{\mu}m$ standard CMOS technology. To drive the class-E power amplifier, a Class-F RF power amplifier is used and the reliability characteristics are studied with a class-E load network. After one year of operating the power amplifier with an RF choke, the PAE(Power Added Efficiency) decreases from 60% to 47% and the output power decreases 29%. However, when a finite DC-feed inductor is used with the load, the PAE decreases from 60% to 53% and the output power decreases only 19%. The simulated results demonstrate that the class-E power amplifier with a finite DC-feed inductor exhibits superior reliability characteristics.

Keywords

References

  1. E. Morifuji, H.S.Momose, et al, 'Future perspective and scaling down Roadmap for RF CMOS,' Symposium on VLSI Circuits Dig. of Technical Papers, pp. 165-166, 1999 https://doi.org/10.1109/VLSIC.1999.797271
  2. P. J. Sulivan, B. A. Xavier, and W. H. Ku, 'Low voltage performance of a microwave CMOS Gilbert cell mixer,' IEEE. J. Solid-State Circuits, vol. 32, pp. 1151-1155, 1997 https://doi.org/10.1109/4.597309
  3. R. A. Rafla and M. N. Gamal, 'Design of a 1.5V CMOS integrated 3GHz LNA,' in proc. ISCAS, pp. 440-443, 1999 https://doi.org/10.1109/ISCAS.1999.780759
  4. Steve Hung-Lung Tu and Fu Jen, 'Class E RF Tuned Power Amplifiers in CMOS Technologies : Theory and Circuit Design Considerations,' IEEE Radio Communications, pp. S6-S11, September 2004 https://doi.org/10.1109/MCOM.2004.1336718
  5. Chris Trask, 'Class- F Amplifier Loading Networks:A Unified Design Approach,' IEEE MTT-S Digest, pp. 351-354, 1999 https://doi.org/10.1109/MWSYM.1999.779491
  6. Tirdad Sowlati, C. Andre T. Salama, et al, 'Low Voltage, High Efficiency GaAs Class E Power Amplifiers for Wireless Transmitters,' IEEE Journal of Solid-State Ciruits, vol. 30, No. 10, pp, 1074-1080, 1995 https://doi.org/10.1109/4.466076
  7. W. C. Lin, T. C. Wu, Y. H. Tsai, L. J. Du, and Y. C. King, 'Reliability evaluation of class-E and class-A power amplifiers with nanoscaled CMOS technology,' IEEE Trans. on Electron Devics, vol. 52, No. 7, July 2005 https://doi.org/10.1109/TED.2005.850639
  8. J. E. Chung, M. C. Jeng, J. E. Moon, P. K. Ko and C. Hu, 'Low-voltage hot-electron currents and degradation in deep submicronmeter MOSFET's,' IEEE. Trans. on Electron Devices, vol. 37, No.7, pp. 1651-1657, July 1990 https://doi.org/10.1109/16.55752
  9. C. Yoo, and Q. Huang, 'A common-gate switched 0.9W class-E power amplifier with 41% PAE in 0.25um CMOS,' IEEE. J. Solid-State Circuits, vol. 36, No.5, pp. 823-830, May 2001 https://doi.org/10.1109/4.918921