References
- 박진기, 김영석, T. Kuwabara, 유봉선, 2005, AZ31 마그네슘 합금 판재의 소성변형특성, 한국소성가공학회지, 제 14 권, 제 6 호, pp. 520-526 https://doi.org/10.5228/KSPP.2005.14.6.520
- 추동균, 강충길, 이준희, 2005, 툴 표면처리 및 온도가 AZ31 마그네슘 판재의 드로잉에 미치는 영향, 한국소성가공학회 2005 년도 추계학술대회 논문집, pp. 118-121
- 신현우, 유형조, 여동훈, 신경열, 고윤석, 최상운, 이성원, 2005, 마그네슘 합금 판재를 이용한 차량용 후드의 설계 및 해석, 한국소성가공학회 2005 년도 추계학술대회 논문집, pp. 220-226
- 이병호, N.S.Reddy, 이종수, 2005, 인공 신경망을 이용한 AZ31 Mg 합금의 고온 변형 거동 연구, 한국소성가공학회 2005 년도 추계학술대회 논문집, pp. 231-234
- 김민철, 이영선, 권용남, 김상우, 이정환, 2005, AZ31 합금의 온간 사각 컵 디프 드로잉 공정에서의 성형성에 관한 연구, 한국소성가공학회 2005 년도 추계학술대회 논문집, pp. 235-238
- E. Doege, K. Droder, 2001, Sheet metal forming of magnesium wrought alloys-formability and process technology, J. Mat. Proc. Tech., Vol. 115, pp. 14-19 https://doi.org/10.1016/S0924-0136(01)00760-9
- F. K. Chen, T. B. Huang, C. K. Chang, 2003, Deep drawing of square cups with magnesium alloy AZ3l sheets, Int. J. Mach. Tool. Manufac., Vol. 43, pp. 1553-1559 https://doi.org/10.1016/S0890-6955(03)00198-6
- H. Takuda, T. Yoshii, N. Hatta, 1999, Finite-element analysis of the formability of a magnesium-based alloy AZ31 sheet, J. Mat. Proc. Tech., Vol. 89-90, pp. 135-140
- N. Ogawa, M. Shiomi, K. Osakada, 2002, Forming limit of magnesium alloy at elevated temperatures for precision forging, Int. J. Mach. Tool. Manufac., Vol. 42, pp. 607-614 https://doi.org/10.1016/S0890-6955(01)00149-3
- H. Palaniswamy, G. Ngaile, T. Altan, 2004, J. Mat. Proc. Tech., Vol. 146, pp. 52-60 https://doi.org/10.1016/S0924-0136(03)00844-6
- H. Takuda, T. Morishita, T. Kinoshita, N. Shirakawa, 2005, Modelling of formula for flow stress of a magnesium alloy AZ31 sheet at elevated temperatures, J. Mat. Proc. Tech., Vol. 164-165, pp. 1258-1262 https://doi.org/10.1016/j.jmatprotec.2005.02.034
- M. Oyane, T. Sato, K. Okimoto, S. Shima, 1980, Criteria for ductile fracture and their applications, J. Mech. Work. Tech., Vol. 4, pp. 65-81 https://doi.org/10.1016/0378-3804(80)90006-6
- MSC Software, 2003, MSC.Marc Volume E
- A. M. Goijaerts, L. E. Govaerts, F. P. T. Baaijens, 2000, Prediction of Ductile Fracture in Metal Blanking, J. Manufac. Sci. Eng., Trans. ASME, Vol. 122, pp. 476-483 https://doi.org/10.1115/1.1285909
- D. L. Yin, K. F. Zhang, G. F. Wang, W. B. Han, 2005, Warm deformation behavior of hot-rolled AZ31 Mg alloy, Mat. Sci. Eng. A, Vol. 392, pp. 320-325 https://doi.org/10.1016/j.msea.2004.09.039
- N. Ogawa, M. Shiomi, K. Osakada, 2002, Forming limit of magnesium alloy at elevated temperatures for precision forging, Int. J. Mach. Tool. Manufac., Vol. 42, pp. 607-614 https://doi.org/10.1016/S0890-6955(01)00149-3
Cited by
- Experimental and Analytical Evaluation of Forming Characteristics for AZ31B Magnesium Alloy Sheet vol.20, pp.2, 2011, https://doi.org/10.5228/KSTP.2011.20.2.146
- Process Development for Automotive Hybrid Hood using Magnesium Alloy AZ31B Sheet vol.20, pp.2, 2011, https://doi.org/10.5228/KSTP.2011.20.2.160
- Study by Numerical Simulation of the Deep Drawing Parameters-Material during the Wheelbarrow Forming vol.895, 2017, https://doi.org/10.4028/www.scientific.net/MSF.895.94