DOI QR코드

DOI QR Code

A Study on Rheology Forming Process of Al-7%Si Alloy with Electromagnetic Application

전자교반을 응용한 Al-7%Si 알루미늄 소재의 레올로지 성형공정에 관한 연구

  • 고재홍 (부산대학교 정밀기계공학과 대학원) ;
  • 서판기 (부산대학교 정밀정형 및 금형가공연구센터) ;
  • 강충길 (부산대학교 기계공학부)
  • Published : 2006.04.01

Abstract

This paper focuses on a rheo-forming of am part fabricated by electromagnetic stirring system (EMS). This forming process take place under high pressure of high pressure die casting and thin walled casting is possible. Furthermore, the productivity is better than low pressure die casting because of shorter cycle time. The advantages of rheo-forming are performed in the semi solid state with laminar flow and the gas content is low, which makes welding possible. Therefore this research applies for arm part with EMS and has investigated the mechanical properties after T6 and T5 heat-treatment.

Keywords

References

  1. O. Shinobo, 1994, Research activities in rheo technology Ltd., Proc. of 3rd Int. Conf. on Semi-Solid Processing of Alloys and Composites, Institute of Industrial Science University of Tokyo, Japan, pp. 7-18
  2. C. G. Kang, P. K. Seo, Y. P. Jeon, 2005, Thixo die-casting process for fabrication of thin-type component with wrought aluminum alloys and its formability limitation, Journal of Materials Processing Technology, Vol. 160, pp. 59-69 https://doi.org/10.1016/j.jmatprotec.2004.03.032
  3. K. Sukumaran, B. C. Pai, M. Chakraborty, 2004, The effect of isothermal mechanical stirring on an Al-Si alloy in the semisolid condition, Mater. Sci. Eng. Vol. 369, pp. 275-283 https://doi.org/10.1016/j.msea.2003.11.036
  4. 강충길, 서판기, 손영익, 2002, 반용융 다이 캐팅 공정에 있어서 속도 제어방법이 부품의 특성에 미치는 영향, 대한기계학회 논문집 A, 제 26 권, 제 10 호, pp. 2034-2043
  5. G. Chairmetta, L. Zanardi, 1996, Productiom of structural components by thixoforming aluminum alloys, Proc. of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Sheffield, D.H. Kirkwood, P. Kapranos, Eds., Univ. of Sheffield, UK, pp. 235-244
  6. K. P. Young, R. Fitze, 1994, Semi-Solid Metal Cast Aluminum Automotive Components, Proc. of 3rd Int. Conf. on Semi-solid Processing of Alloys and Composites, pp. 155-176
  7. 고재홍, 서판기, 최우식, 강충길, 2004, 수평식 전자교반을 이용한 A356 합금의 결정립제어, 한국소성가공학회 추계학술대회 논문집, pp. 111-114
  8. 임성철, 윤의박, 1992, 전자교반시 Al-7wt%Si 합금의 초정입자에 미치는 유동의 영향 한국주조공학회 논문집 제 16 권, 제 6 호 pp. 565-575
  9. D. A. Pinskky, P. O. Charreyron, 1993, Alternate reduce weight in automotives, advanced materials and process, Vol. 6, pp. 146-147
  10. 강효경, 천병욱, 최창옥, 1993 AC4C 합금의 기계적 성질에 미치는 주조조건과 열처리의 영향에 관한 연구 한국주조공학회 논문집 제 13 권, 제 5 호, pp. 64-75

Cited by

  1. Effect of forming conditions on mechanical properties of rheoformed thin plates with microchannels using electromagnetic stirring vol.228, pp.3, 2014, https://doi.org/10.1177/0954405413496403