한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제23권6호
  • /
  • Pages.143-150
  • /
  • 2006
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

열피로 수명을 고려한 지역난방 배관의 최적화

Optimization of District Heating Pipes Considering Thermal Fatigue Life

  • 안민용 (성균관대학교 대학원) ;
  • 장윤석 (성균관대학교 기계공학부) ;
  • 최재붕 (성균관대학교 기계공학부) ;
  • 김상호 (한국지역난방공사 연구개발실) ;
  • 김연홍 (한국지역난방공사 연구개발실) ;
  • 김영진 (성균관대학교 기계공학부)
  • 발행 : 2006.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Recently, in proportion to increased demand on environmentally-friendly heat source, efficient management of district heating(DH) system becomes one of important issue. The objectives of this paper are to systematize data processing of transition temperature, investigate the effect of temperature variations on thermal fatigue and find out a way to improve design fractures of Korean DH pipes. For this purpose, reliable fatigue lift evaluation procedures are examined and applied to quantify thermal fatigue lives. Also, as a prototypal optimization analysis results, mean value of original cross sectional area of selected pipes was reduced 18.6% sustaining their sufficient margins against fatigue failure. So, it is anticipated that the output of this research can be used as useful information of optimal design and operation in the future.

키워드

참고문헌

  1. International Energy Agency, 'http://www.iea.org,' ？accessed on September, 2005
  2. Korea District Heating Corp., 'http://kdhc.co.kr,' accessed on September, 2005
  3. Randlov, P. and Hansen, K. E., 'Temperature Variations in Pre-insulated DH Pipes Low Cycle Fatigue,' International Energy Agency, 1996
  4. McClellan, J. H., Schafer, R. W. and Yoder, M. A., 'DSP First: A Multimedia Approach,' Prentice HaIl, pp. 134-149, 1997
  5. Bannantine, J. A., Comer, J. J. and Handrock, J. L., 'Fundamentals of Metal Fatigue Analysis,' 1st Edition, Prentice Hall, 1990
  6. Matsuishi, M. and Endo, T., 'Fatigue of Metals Subjected to Varying Stress,' Proc. Of Japan Society of Mechanical Engineers, 1968
  7. ANSYS, 'Introduction to ANSYS 8.0,' ANSYS Inc., 2004
  8. ASME, 'B&PV Code Sec. III, Div. 1 - Rules for construction of nuclear power plant components,' 1998
  9. ASME, 'B&PV Code Sec. II, Part A - Ferrous Materials,' 1989
  10. Pipe & tube information and international trade center, 'http://www.e-pipe.co.kr' accessed on December, 2004
  11. Kim, J. G., 'A Study on Corrosion Fatigue Crack for District Heating Pipes,' Sungkyunkwan Univ., 2002
  12. Park, C. W., 'Aircraft Wing Spar Cross-section Area Optimization with Response Surface Method,' J. of the KSPE, Vol. 19, No.4, pp. 109-116,2002
  13. Kim, H. S., Ahn, C. W., Choi, K. H. and Park, J. H., 'Shape Optimization of a Bogie Frame for the Reduction ofIts Weight,' J. of the KSPE, Vol. 19, No. 9, pp. 186-192,2002
  14. Hong, D. K., Choi, S. C. and Ahn, C. W., 'Robust Optimization Design of Overhead Crane with Constraint using the Characteristic Functions,' J. of the KSPE, Vol. 21, No.2, pp. 160-167,2004
  15. Engineers, 'iSight User Manual-Basic Training,' Engineers Inc., 2005
  16. Rao, S. S., 'Engineering Optimization-Theory and Practice,' Wiley Interscience, 1996