References
- 하태웅, '엇갈린 래버린스 실의 누설량 및 동특성 해석, '윤활학회지, 제 18권, 제1호, pp. 24-33, 2002
- 하태웅, 이용복, 김승종, 김창호, '스팀 터빈용 조합형 엇갈린 래버린스 실의 누설량 및 동특성 해석,' 유체기계저널, 제7권, 제6호, pp.45-54, 2004
- Alford, J. S., 'Protecting Turbomachinery from Self-Excited Rotor Whirl,' ASME Trans. Journal of Engineering for Power, October, pp. 333-344, 1965
- Iwatsubo, T., 'Evaluation of Instability Forces of Labyrinth Seals in Turbines or Compressors,' NASA CP 2133 Proceedings of a Workshop at Texas A&M University 12-14 May Entitled Rotordynamic Instability Problems in High Performance Turbomachinery, pp. 139-167,1980
- Jenny, R. J., Wyssmann, H. P. and Pham, T. C., 'Prediction of Stiffness and Damping Coefficients for Centrifugal Compressor Labyrinth Seals,' ASME 84GT-86. Presented at the 29th international Gas Turbine Conference and Exhibit, Amsterdam, The Netherlands, June 4-7,1984
- Childs, D. W. and Scharrer, J. K., 'An Iwatsubo Based Solution for Labyrinth Seals: A Comparison to Experimental Results,' ASME Trans. Journal of Engineering for Gas Turbines and Power, April, Vol. 108, pp. 325-331, 1986 https://doi.org/10.1115/1.3239907
- Scharrer, J., 'A Comparison of Experimental and Theoretical Results for Labyrinth Gas Seals,' Ph. D. Dissertation, Texas A&M University, 1987
- 8. 하태웅, 이안성, '압축기용 라비린스 실의 동특성 해석, '한국소음진동공학회지, 제8권, 제5호, pp. 849-855, 1998
- Scharrer, J. K., 'Rotordynamic Coefficients for Stepped Labyrinth Gas Seals,' ASME/ASLE Tribology Conference, Paper No. 88- Trib-42, 1988
- Ha, T. W., 'Rotordynarnic Analysis for Stepped-Labyrinth Gas Seal Using Moody's Friction-Factor Model,' KSME International Journal, Vol. 15, No.9, pp. 1079-1089, 2001 https://doi.org/10.1007/BF03185088
- Neumann, K., 'Zur Frage der Verwendung von Durchblickdichtungen im Dampgturbinebau,' Maschinentechnik, Vol. 13, No.4, 1964
- Vermes, G., 'A Fluid Mechanics Approach to the Labyrinth Seal Leakage Problem,' ASME Journal of Engineering for Power, Vol. 83, No.2, April, pp. 161-169, 1961 https://doi.org/10.1115/1.3673158
- Gurevich, M. I., 'The Theory of Jets In an Ideal Fluid,' Pergamon Press, London, England, pp. 319-323,1966
- John, J. E. A., 'Gas Dynamics,' Wylie, 1979
- Dietzen, F. J. and Nordmann, R., 'Calculating Rotordynamic Coefficients of Seals by Finite-Difference Techniques,' the 4th Workshop on Rotordynamic Instability Problems in High Performance Turbomachinery, pp. 77-98, 1986
- Park, S. Y. and Rhode, D., 'CFD Solution Allowing Modeling Improvement to the Bulk Flow Rotordynamic Code of Dr. Childs for Grooved Seals,' Texas A&M University, TRC-SEAL-6-98, 1998
- Moore, J., Palazzolo, A. and Na U. J., 'CFD Modeling for Dynamic Coefficients of Labyrinth Seals and Impeller Leakage Paths,' Texas A&M University, TRC-SEAL-2-98, 1998
- Fluent User's Guide Ver. 6.2
Cited by
- 회전체 동역학 및 Tribo 요소의 연구동향 vol.10, pp.1, 2007, https://doi.org/10.5293/kfma.2007.10.1.101
- 누설량 저감을 위한 래버린스 실의 설계개선 및 해석 vol.23, pp.2, 2006, https://doi.org/10.9725/kstle.2007.23.2.043
- 3차원 CFD를 사용한 환상 실의 누설량 예측 vol.25, pp.3, 2009, https://doi.org/10.9725/kstle.2009.25.3.150
- CFD를 사용한 스팀터빈용 각이 진 패킹 링 실의 누설량 예측 vol.25, pp.5, 2006, https://doi.org/10.9725/kstle.2009.25.5.298
- CFD를 사용한 고성능 펌프 실의 동특성 계수 예측 vol.26, pp.1, 2006, https://doi.org/10.9725/kstle.2010.26.1.037
- CFD를 사용한 비접촉식 가스 실의 입구 선회류 영향 해석 vol.16, pp.3, 2013, https://doi.org/10.5293/kfma.2013.16.3.026
- 3D CFD를 활용한 관통 래버린스 실의 회전체 동역학적 해석 vol.18, pp.1, 2015, https://doi.org/10.5293/kfma.2015.18.1.044
- CFD를 활용한 스팀터빈 하이브리드(브러쉬+래버린스) 실의 누설특성 해석 vol.20, pp.5, 2017, https://doi.org/10.5293/kfma.2017.20.5.005
- DN 250만 250℃고온 스팀환경에서 운전되는 단열 브러쉬 실 마모효과에 관한 실험적 연구 vol.35, pp.2, 2019, https://doi.org/10.9725/kts.2019.35.2.99
- 스러스트 래버린스 실을 배면에 갖는 원심형 임펠러의 축력 해석 vol.37, pp.1, 2006, https://doi.org/10.9725/kts.2021.37.1.31