International Journal of Concrete Structures and Materials

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Concrete Stress Block Parameters for High-Strength Concrete : Recent Developments and Their Impact

  • Bae, Sun-Gjin (Dept. of Civil Engineering, The University of Texas at Austin)
  • Published : 2006.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

The use of the current ACI 318 stress block parameters has been reported to provide unconservative estimations of the moment capacities for high-strength concrete columns. Accordingly, several concrete stress block parameters have been recently proposed. This paper discusses various concrete stress block parameters for high-strength concrete and their influences on the code provisions. In order to adopt the proposed stress block parameters to the design code, it is necessary to understand the impact of the change of the stress block parameters on various aspects of the code provisions. For this purpose, the influence of using of different stress block parameters on the location of the neutral axis and the tensile strain in extreme tension steel as well as the axial and moment capacities are investigated. In addition, the influence on the prestressed concrete members is also elucididated.

Keywords

References

  1. Canadian Standards Association, Design of Concrete Structures in Buildings, (CAN 3-A23.3-M94), Rexdale, Ontario, Canada, 1994
  2. Standards New Zealand, Design of Concrete Structure, (NZS 3101-1995), Wellington, New Zealand, 1995
  3. Bae, S. and Bayrak, 0., 'Stress Block Parameters for HSC Members,' ACI Structural Journal, Vo1.l00, No.5, 2003, pp.626-636
  4. American Concrete Institute, Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), Farmington Hills, Michigan, 2005
  5. Whitney, C. S., 'Design of Reinforced Concrete Members Under Flexure and Combined Flexure and Direct Compression,' Journal of The American Concrete Institute, Vol.33, No4, 1937, pp483-498
  6. Hognestad, E., Hanson, N. W., and McHenry, D., 'Concrete Stress Distribution in Ultimate Strength Design,' Journal of the American Concrete Institute, Vol.52, No.28, 1955, pp455-479
  7. Mattock, A. H., Kriz, L. B., and Hognestad, E., 'Rectangular Concrete Stress Distribution in Ultimate Strength Design,' Journal of The American Concrete Institute, Vol.57, No.8, 1961, pp.875-928
  8. Nedderman, H., Flexural Stress Distribution in Very High Strength Concrete, M.A.Sc. Thesis, Department of Civil Engineering, University of Texas, Arlington, Texas, 1973
  9. American Concrete Institute, Building Code Requirements for Reinforced Concrete (ACl 318-77), American Concrete Institute, 1977
  10. Ibrahim, H. H. H. and MacGregor, 1. G., 'Modification of the ACI Rectangular Stress Block for High-Strength Concrete,' AC1 Structural Journal, Vol.94, No.1, 1997, ppAO-48
  11. Li B., Park, R., and Tanaka, H., Strength and Ductility of Reinforced Concrete Members and Frames Constructed using High-Strength Concrete, Research Report No.94-5, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand, 1994, 373pp
  12. ACl 318 TG-5, in the committee meeting, AC1fall conference, San Francisco, California, 2004
  13. Bae, S. and Bayrak, 0., 'Early Cover Spalling in HighStrength Concrete Columns,' Journal of Structural Engineering, ASCE, Vo1.129, No.3, 2003, pp.314-323 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:3(314)