DOI QR Code
(Dept. of Architectural Engineering, Inha University)
;
(Dept. of Architectural Engineering, Namseoul University)
;
(Dept. of Architectural and Environment System Engineering, Sungkyunkwan University)
In order to remodel old aged reinforced concrete buildings, it is often required to extend the residence area of the buildings by increasing the slab area. The slab area is usually extended by attaching a new slab to the existing slab with hinged joint or rigid joint. Transmission of the loads of the attached slabs to the existing slabs depends on the connecting methods, such as hinged or rigid connection. In this research, 8 specimens and 24 RC slabs connected by rigid joints were tested. The new slab was connected to the existing slab by three types of rigid joints using dowel bars and longitudinal tensile bars. Main parameters of the slabs were three types of the rigid joints, anchor length of steel bars(0, 50, 60, 100, and 120mm), development length of steel bars(100, 200, and 300mm), and the spacing of the steel bars(150, 200, 300, and 450mm). The test results indicated that the flexural strength of the RC test slabs having various types of rigid joints was approximately the same to that of the slab without any connections.
노후화된 철근콘크리트 공동주택을 리모델링할 경우에 거주성의 향상을 위하여 기존 바닥판에 새로운 바닥판을 신설하여 기존 건물의 평면을 확장시키는 경우가 많다. 새로운 바닥판이 기존 바닥판에 연결될 경우에 두 바닥판의 접합 방법에 따라서 힘의 흐름이 달라진다. 이 연구에서는 8개의 부분 실험체와 24개의 전체 실험체를 제작하여 3종류의 강절점으로 연결된 바닥판 접합부의 파괴모드와 내력을 실험적으로 평가하였다. 실험체의 주요변수는 강절점 접합방식, 철근의 묻힘 깊이(0, 50, 60, 100, 120mm), 묻힘 길이(100, 200, 300mm), 철근의 배근 간격(150, 200, 300, 450mm)이다. 실험에서 강절점으로 연결된 바닥판의 휨내력은 일체화된 바닥판의 철근항복시의 내력과 유사하였다.